3 A step-down monolithic switching regulator

文件：2.13244 Mbytes 页数：34 Pages

STMICROELECTRONICS

意法半导体

3 A step-down monolithic switching regulator

文件：2.53293 Mbytes 页数：33 Pages

STMICROELECTRONICS

意法半导体

3 A step-down monolithic switching regulator

文件：2.53293 Mbytes 页数：33 Pages

STMICROELECTRONICS

意法半导体

3 A step-down monolithic switching regulator

文件：2.13244 Mbytes 页数：34 Pages

STMICROELECTRONICS

意法半导体

Monolithic buck converter for DDR memory termination

文件：381.84 Kbytes 页数：28 Pages

STMICROELECTRONICS

意法半导体

Monolithic buck converter for DDR memory termination

文件：381.84 Kbytes 页数：28 Pages

STMICROELECTRONICS

意法半导体

Single and dual output 10 to 12 Watt Nominal input DC/DC converters

文件：38.39 Kbytes 页数：2 Pages

ARTESYN

3 A步降单片式开关稳压器

The PM8903A is a high efficiency monolithic step-down switching regulator designed to deliver up to 3 A continuous current. The IC operates from 2.8 V to 6 V input voltage (VIN).\n\n The PM8903A features low-resistance integrated nMOS and proprietary pulse-skipping mode for optimum efficiency over a • Integrated 35 mΩ MOSFETs for high efficiency \n• 3 A continuous output current \n• 2.8 V to 6 V input voltage (VIN) \n• 2.9 V to 5.5 V supply voltage (VCC) \n• Adjustable output voltage down to 0.6 V \n• 1% output voltage accuracy \n• 1.1 MHz switching frequency operation \n• PSKIP mode to opt;

ST

意法半导体

6 A step-down monolithic switching regulator

The PM8906 device is a high efficiency monolithic step-down switching regulator designed to deliver an up to 6 A continuous current. The IC operates from 2.8 V to 6 V input voltage (VIN).\nThe PM8906 features a low resistance integrated NMOS and a proprietary pulse-skipping mode for optimum efficien Integrated 17 mΩ MOSFETs for high efficiency\n6 A continuous output current\n2.8 V to 6 V input voltage (VIN)\n2.9 V to 5.5 V supply voltage (VCC)\nAdjustable output voltage down to 0.6 V\n1% output voltage accuracy\nProgrammable switching frequency\nProgrammable OCP threshold\nPSKIP mode to opt;

ST

意法半导体

DDR存储器终端的单片式降压转换器

The PM8908 is a high efficiency monolithic step-down switching regulator designed mainly for the DDR termination.\n\n The IC operates from 1 V to 3.5 V input voltage (VIN).\n\n The device uses a COT control loop that provides very good performances in terms of load and line transients. The current s • Integrated MOSFETs for high efficiency \n• Current COT architecture \n• 1 V to 3.5 V input voltage (VIN) \n• 5.0 V supply voltage (VCC) \n• Constant frequency mode \n• 1% output voltage accuracy \n• Two programmable switching frequencies (0.6 MHz or 1 MHz)• ADJ output voltage from 0.5 V to 2 V;

ST

意法半导体