Features

• Optimized MOSFET switching performance with integrated Schottky diode in LS

MOSFET

• 110 A peak and 60 A continuous current capability

• High frequency operation up to 1.5 MHz

• 3.3 V PWM logic with tri-state and hold-off

• PWM minimum controllable on-time of 30 ns

• Low PWM propagation delay (< 20 ns)

• Current sense monitor output 5mV/A (IMON) and 2 accuracy

• Temperature monitor output 8mV/C (TMON) and 2 accuracy

• Fault reporting and mapping through both IMON and TMON

– High Side MOSFET Short

– Accurate over-current protection

– Over-temperature protection

– Under-voltage lockout for VIN/VCC/VDRV/BOOT

• Thermally enhanced QFN 5x6 41L package

Application

• High performance synchronous buck converter

– Intel, AMD CPU power supply

– GPU, ASIC and AI chip power supply

– Cloud computing and AI

• DC/DC converters

• Telecom and networking

Description

The PM7080A is an integrated power stage solution optimized for synchronous buck

applications to offer high current, high efficiency, and high power density solution.

Packaged in 5x6 mm QFN package, the PM7080A enables voltage regulator design

to deliver above 110 A per phase peak current.

The internal power MOSFETs utilize state-of-the-art technology that delivers industry

benchmark performance to significantly reduce switching and conduction losses.

The PM7080A incorporates an advanced MOSFET gate driver IC that features high

current diving capability, adaptive dead-time control and integrated bootstrap switch

to enable high frequency switching up to 1.5MHz.

The device incorporates an innovative inductor current emulation algorithm with

thermal compensation to achieve best-in-class reporting accuracy. It also includes

a temperature monitor function with 2 accuracy. The PM7080A provides

comprehensive protection features, including cycle-by-cycle over-current protection,

over-temperature protection, high-side MOSFET short protection, VIN/VCC/VDRV/

BOOT UVLO protection. In addition to their analog reporting capability, the combined

logic outputs of IMON and TMON provide fault mapping to the PWM controller for

specific fault condition deciphering.

The PM7080A is compatible with industry-standard footprint.