PIC32MX795F512H数据手册Microchip中文资料规格书

描述 Description

The PIC32MX5/6/7 series with integrated 10/100 Mbit Ethernet MAC and industry-leading connectivity and peripheral options enables you to build embedded connectivity-based applications. These MCUs are fully supported by the MPLAB® Harmony integrated software framework, which features software solutions to accelerate your application development. Key Features80 MHz/105 DMIPS performanceIntegrated 10/100 Mbps Ethernet MACDedicated DMA interface for direct access to the entire system RAMIndustry-standard RMII/MII interface to PHYPre-programmed MAC addressFull speed USBRich peripheral set

特性 Features

•80MHz/105DMIPS, 32-bit MIPS M4K® Core
•USB 2.0 On-The-Go Peripheral with integrated PHY
•10/100 Ethernet MAC with MII/RMII Interfaces
•2 x CAN2.0b modules with 1024 buffers
•8 Dedicated DMA Channels for USB OTG, Ethernet, and CAN
•5 Stage pipeline, Harvard architecture
•MIPS16e mode for up to 40% smaller code size
•Single cycle multiply and hardware divide unit
•32 x 32-bit Core Registers
•32 x 32-bit Shadow Registers
•Fast context switch and interrupt response
•512K Flash (plus 12K boot Flash)
•128K RAM (can execute from RAM)
•8 Channel General Hardware DMA Controller
•Flash prefetch module with 256 Byte cache
•Lock instructions or data in cache for fast access
•Programmable vector interrupt controller
•Fast and Accurate 16 channel 10-bit ADC,
•Max 1 Mega sample per second at +/- 1LSB, conversion available during SLEEP & IDLE
•RUN, IDLE, and SLEEP modes
•Multiple switchable clock modes for each power mode, enables optimum power settings
•8 hardware breakpoints (6 Instruction and 2 Data)
•2 wire programming and debugging interface
•JTAG interface supporting Programming, Debugging and Boundary scan
•Fail-Safe Clock Monitor - allows safe shutdown if clock fails
•2 Internal oscillators (8MHz & 31KHz)
•Hardware RTCC (Real-Time Clock and Calendar with Alarms)
•Watchdog Timer with separate RC oscillator
•Pin compatible with 16-bit PIC® MCUs
•Serial Communication Modules allow flexible UART/SPI/I2C™ configuration