SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196

文件：223.73 Kbytes 页数：2 Pages

PASTERNACK

SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196

SMC Jack Bulkhead Connector Crimp/Solder Attachment For RG178, RG196\n\nPE4365 SMC jack bulkhead coaxial connector has an interface type of RG178, RG196 and a 50 Ohm impedance. Pasternack SMC jack bulkhead connector uses shield/contact crimp/solder as an attachment method.\n\nThe Pasternack SMC jack Key Specifications (Click on Data Sheet Above for Additional Details).\n• PolarityStandard\n• Connector SeriesSMC\n• Connector GenderJack\n• Impedance50 Ohm\n• Body StyleStraight\n• Attachment MethodCrimp/Solder\n• Mount MethodBulkhead\n• Interface Type 1RG178\n• Interface Type 2RG196;

Pasternack

丝印：43650；Package：QFN；50Ω RF Digital Step Attenuator 5-bit, 15.5 dB, 9 kHz–6 GHz

Features • Attenuation: 0.5 dB steps to 15.5 dB • High linearity: Typical +58 dBm IP3 • Excellent low-frequency performance • Programming modes: ▪ Direct parallel ▪ Latched parallel ▪ Serial • CMOS-compatible • No DC blocking capacitors required • Packaged in a 24-lead 4 x 4 x 0.85 mm QF

文件：590.04 Kbytes 页数：17 Pages

PSEMI

50Ω RF Digital Step Attenuator 5-bit, 15.5 dB, 9 kHz–6 GHz

Features • Attenuation: 0.5 dB steps to 15.5 dB • High linearity: Typical +58 dBm IP3 • Excellent low-frequency performance • Programming modes: ▪ Direct parallel ▪ Latched parallel ▪ Serial • CMOS-compatible • No DC blocking capacitors required • Packaged in a 24-lead 4 x 4 x 0.85 mm QF

文件：590.04 Kbytes 页数：17 Pages

PSEMI

UltraCMOS® RF Digital Step Attenuator

The PE43650 is a high linearity, 5-bit RF digital step attenuator (DSA). This highly versatile DSA covers a 15.5 dB attenuation range in 0.5 dB steps. The PE43650 50Ω RF DSA provides multiple CMOS control interfaces. It maintains high attenuation accuracy over frequency and temperature and exhibits • Attenuation: 0.5 dB steps to 15.5 dB\n• High linearity: Typical +58 dBm IP3\n• Excellent low-frequency performance\n• Programming modes: Direct parallel, latched parallel and serial\n• CMOS-compatible\n• No DC blocking capacitors required\n• Packaging: 24-lead 4 × 4 × 0.85 mm QFN;

pSemi