Advanced POCSAG Paging Decoder

GENERAL DESCRIPTION The PCD5003 is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003 is

文件：187.61 Kbytes 页数：44 Pages

PHI

飞利浦

Advanced POCSAG Paging Decoder

GENERAL DESCRIPTION The PCD5003 is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003 is

文件：187.61 Kbytes 页数：44 Pages

PHI

飞利浦

FLEX Pager Decoder

GENERAL DESCRIPTION This data sheet describes the operation of the PCD5008 integrated paging decoder. It is fully compatible with the Motorola FLEXchip™ IC. The PCD5008, also referred to as the decoder, simplifies implementation of a FLEX paging device, by being able to interface with several o

文件：341.62 Kbytes 页数：64 Pages

PHI

飞利浦

FLEX Pager Decoder

GENERAL DESCRIPTION This data sheet describes the operation of the PCD5008 integrated paging decoder. It is fully compatible with the Motorola FLEXchip™ IC. The PCD5008, also referred to as the decoder, simplifies implementation of a FLEX paging device, by being able to interface with several o

文件：341.62 Kbytes 页数：64 Pages

PHI

飞利浦

FLEX roaming decoder II

GENERAL DESCRIPTION This data sheet describes the operation of the PCD5013 integrated paging decoder. It is fully compatible with other FLEXchip™ ICs including the PCD5008. The PCD5013, also referred to as the decoder, simplifies implementation of a FLEX™ paging device, by being able to interfac

文件：270.73 Kbytes 页数：76 Pages

PHI

飞利浦

FLEX roaming decoder II

GENERAL DESCRIPTION This data sheet describes the operation of the PCD5013 integrated paging decoder. It is fully compatible with other FLEXchip™ ICs including the PCD5008. The PCD5013, also referred to as the decoder, simplifies implementation of a FLEX™ paging device, by being able to interfac

文件：270.73 Kbytes 页数：76 Pages

PHI

飞利浦

ADPCM CODEC for digital cordless telephones

GENERAL DESCRIPTION The PCD5032 is a CMOS device designed for use in Digital Enhanced Cordless Telephone systems (DECT), but also suitable for other cordless telephony applications such as CT2. The PCD5032 performs analog-to-digital and digital-to-analog conversion, ADPCM encoding and decoding co

文件：136.26 Kbytes 页数：24 Pages

PHI

飞利浦

ADPCM CODEC for digital cordless telephones

GENERAL DESCRIPTION The PCD5032 is a CMOS device designed for use in Digital Enhanced Cordless Telephone systems (DECT), but also suitable for other cordless telephony applications such as CT2. The PCD5032 performs analog-to-digital and digital-to-analog conversion, ADPCM encoding and decoding co

文件：136.26 Kbytes 页数：24 Pages

PHI

飞利浦

ADPCM CODEC for digital cordless telephones

GENERAL DESCRIPTION The PCD5032 is a CMOS device designed for use in Digital Enhanced Cordless Telephone systems (DECT), but also suitable for other cordless telephony applications such as CT2. The PCD5032 performs analog-to-digital and digital-to-analog conversion, ADPCM encoding and decoding co

文件：136.26 Kbytes 页数：24 Pages

PHI

飞利浦

DECT burst mode controller

GENERAL DESCRIPTION The PCD5041 DECT Burst Mode Controller (BMC) is a custom IC that performs the DECT Physical Layer and MAC Layer time-critical functions, for use in DECT handset products which comply with the following standards (and updates): • DECT CI part 2: Physical layer (DE/RES 3001

文件：134.57 Kbytes 页数：28 Pages

PHI

飞利浦