Advanced POCSAG and APOC-1 Paging Decoder

GENERAL DESCRIPTION The PCD5002 is a very low power pager decoder and controller, capable of handling both standard POCSAG and the advanced APOC-1 code. Continuous data decoding upon reception of a dedicated sync word is available for news pager applications. Data rates supported are 512, 12

文件：203.79 Kbytes 页数：48 Pages

PHI

PHI

Advanced POCSAG and APOC-1 Paging Decoder

GENERAL DESCRIPTION The PCD5002 is a very low power pager decoder and controller, capable of handling both standard POCSAG and the advanced APOC-1 code. Continuous data decoding upon reception of a dedicated sync word is available for news pager applications. Data rates supported are 512, 12

文件：203.79 Kbytes 页数：48 Pages

PHI

PHI

Advanced POCSAG Paging Decoder

GENERAL DESCRIPTION The PCD5003 is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003 is

文件：187.61 Kbytes 页数：44 Pages

PHI

PHI

Enhanced Pager Decoder for POCSAG

GENERAL DESCRIPTION The PCD5003A is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003A

文件：233.34 Kbytes 页数：44 Pages

PHI

PHI

Enhanced Pager Decoder for POCSAG

GENERAL DESCRIPTION The PCD5003A is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003A

文件：233.34 Kbytes 页数：44 Pages

PHI

PHI

Advanced POCSAG Paging Decoder

GENERAL DESCRIPTION The PCD5003 is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003 is

文件：187.61 Kbytes 页数：44 Pages

PHI

PHI

Advanced POCSAG Paging Decoder

GENERAL DESCRIPTION The PCD5003 is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003 is

文件：187.61 Kbytes 页数：44 Pages

PHI

PHI

Advanced POCSAG Paging Decoder

GENERAL DESCRIPTION The PCD5003 is a very low power POCSAG decoder and pager controller. It supports data rates of 512, 1200 and 2400 bits/s using a single 76.8 kHz crystal. On-chip EEPROM is programmable using a minimum supply voltage of 2.0 V, allowing ‘over-the-air’ programming. The PCD5003 is

文件：187.61 Kbytes 页数：44 Pages

PHI

PHI

FLEX Pager Decoder

GENERAL DESCRIPTION This data sheet describes the operation of the PCD5008 integrated paging decoder. It is fully compatible with the Motorola FLEXchip™ IC. The PCD5008, also referred to as the decoder, simplifies implementation of a FLEX paging device, by being able to interface with several o

文件：341.62 Kbytes 页数：64 Pages

PHI

PHI

FLEX Pager Decoder

GENERAL DESCRIPTION This data sheet describes the operation of the PCD5008 integrated paging decoder. It is fully compatible with the Motorola FLEXchip™ IC. The PCD5008, also referred to as the decoder, simplifies implementation of a FLEX paging device, by being able to interface with several o

文件：341.62 Kbytes 页数：64 Pages

PHI

PHI