RS-232 to Logic Level Adapter with DB9F Connector and Power LED

Features  RS-232 to logic level adapter with DB9F connector (DCE style) and power LED. Two transmit and two receive drivers provided (Tx, Rx, RTS, and CTS signals).  ComBoard standard pinout for interchangeable serial interface modules. 1x10, 2x5, or 1x4 header options available. Build with

文件：645.1 Kbytes 页数：7 Pages

BUSBOARD

RS-232 to Logic Level Adapter with DB9M Connector and Power LED

Features  RS-232 to logic level adapter with DB9M connector (DTE style) and power LED. Two transmit and two receive drivers provided (Tx, Rx, RTS, and CTS signals).  ComBoard standard pinout for interchangeable serial interface modules. 1x10, 2x5, or 1x4 header options available. Build with

文件：585.35 Kbytes 页数：7 Pages

BUSBOARD

RS-485 to Logic Level Adapter

Features  RS-485 to logic level adapter for multi-drop serial communications. RS-485 is used for long distance or multi-drop serial communications (up to 32 devices).  4-pin terminal block or RJ45 connector build options provided.  Termination resistors and selector jumper build options pro

文件：515.7 Kbytes 页数：11 Pages

BUSBOARD

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

文件：1.59149 Mbytes 页数：31 Pages

PHI

PHI

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

文件：1.59149 Mbytes 页数：31 Pages

PHI

PHI

SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER

文件：1.59149 Mbytes 页数：31 Pages

PHI

PHI

Octal Relay Output Board for Microcontroller Projects

Features  A bare PCB to build a relay board with 8 DPDT relays. Each relay has up to four 3-pin terminal blocks to connect to the relay contacts.  Can be controlled via an I2C interface or 8 logic lines. UEXT connector used for I2C connection.  Can be used with 5V, 9V or 12V Omron G5V s

文件：785.59 Kbytes 页数：3 Pages

BUSBOARD

Development baseboard for the STMicro Discovery-F3 module

Features • STM32-F3U is a breakout board for the STMicro Discovery F3 board with STM32F303 microcontroller (256k program flash, 48k RAM, DSP, and floating point instructions). • Eleven GPIO port headers providing 8 data bits and 3V/5V power. • Four UEXT connector footprints provide UART, I2C,

文件：331.13 Kbytes 页数：6 Pages

BUSBOARD

Development baseboard for the STMicro Discovery-F4 module

Features • STM32-F4B1 is a breakout board for the STMicro Discovery F4 board (with STM32F407VGT6 microcontroller, 1024k program flash, 192k RAM, DSP, and floating point instructions). • Bare PCB with two 2x25 DIL sockets provided for Discovery-F4 module headers. No other parts are provided. BO

文件：372.22 Kbytes 页数：9 Pages

BUSBOARD

Development baseboard for the ST Micro Discovery VL module.

Features • STM32-VLB1 is a breakout board for the STMicro Discovery VL board with STM32F100RBT6 microcontroller (128k program flash, 8k RAM). Bare PCB with Discovery module sockets provided. BOM and schematic available for download. • Six GPIO port headers providing 8 data bits and 3V/5V power

文件：448.56 Kbytes 页数：8 Pages

BUSBOARD