PCA9559PW中文资料5位多路复用/1位闭锁的6位I2C EEPROM DIP开关数据手册恩XP规格书

描述 Description

The PCA9559 is a 20-pin CMOS device consisting of one 6-bit non-volatile EEPROM registers, 5 hardware pin inputs and a 5-bit multiplexed output with one latched EEPROM bit. It is used for DIP switch-free or jumper-less system configuration and supports Mobile and Desktop VID Configuration, where 2 preset values (1 set of internal non-volatile registers and 1 set of external hardware pins) set processor voltage for operation in either performance or deep sleep modes. The PCA9559 is also useful in server and telecom/networking applications when used to replace DIP switches or jumpers, since the settings can be easily changed via I²C/SMBus without having to power down the equipment to open the cabinet. The non-volatile memory retains the most current setting selected before the power is turned off.
The PCA9559 typically resides between the CPU and Voltage Regulator Module (VRM) when used for CPU VID (Voltage IDentification code) configuration. It is used to bypass the CPU-defined VID values and provide a different set of VID values the VRM, if an increase in the CPU voltage is desired. An increase in CPU voltage combined with an increase in CPU frequency leads to a performance boost of up to 7.5pct. Lower CPU voltage reduces power consumption.
The PCA9559 has 2 address pins allowing up to 4 devices to be placed on the same I²C-bus or SMBus.

特性 Features

• 5-bit 2-to-1 multiplexer, 1-bit latch DIP switch
• 6-bit internal non-volatile register
• Internal non-volatile register programmable and readable via I²C-bus
• Override input forces all outputs to logic 0
• 5 open drain multiplexed outputs
• 1 open drain non-multiplexed (latched) output
• 5 V and 2.5 V tolerant inputs
• Useful for ?jumperless? configuration of PC motherboards
• 2 address pins, allowing up to 4 devices on the I²C-bus
• ESD protection exceeds 2000 V HBM per JESD22-A114, 200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
• Latch-up testing is done to JESDEC Standard JESD78 which exceeds 100 mA