PCA9557D中文资料8-bit I2C-bus and SMBus I/O port with reset数据手册恩XP规格书

描述 Description

The PCA9557 is a silicon CMOS circuit which provides parallel input/output expansion for SMBus and I²C-bus applications. The PCA9557 consists of an 8-bit input port register, 8-bit output port register, and an I²C-bus/SMBus interface. It has low current consumption and a high-impedance open-drain output pin, IO0.
The system master can enable the PCA9557's I/O as either input or output by writing to the configuration register. The system master can also invert the PCA9557 inputs by writing to the active HIGH polarity inversion register. Finally, the system master can reset the PCA9557 in the event of a time-out by asserting a LOW in the reset input.
The power-on reset puts the registers in their default state and initializes the I²C-bus/SMBus state machine. The RESET pin causes the same reset/initialization to occur without de-powering the part.

特性 Features

Lower voltage, higher performance migration path for the PCA9556
8 general purpose input/output expander/collector
Input/output configuration register
Active HIGH polarity inversion register
I²C-bus and SMBus interface logic
Internal power-on reset
Noise filter on SCL/SDA inputs
Active LOW reset input
3 address pins allowing up to 8 devices on the I²C-bus/SMBus
High-impedance open-drain on IO0
No glitch on power-up
Power-up with all channels configured as inputs
Low standby current
Operating power supply voltage range of 2.3 V to 5.5 V
5 V tolerant inputs/outputs
0 kHz to 400 kHz clock frequency
ESD protection exceeds 2000 V HBM per JESD22-A114 and 1000 V CDM per JESD22-C101
Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA
Three packages offered: SO16, TSSOP16, HVQFN16