Low Input Current Type Photocoupler

■ Features 1. Low input current type (IF=0.5mA) 2. High resistance to noise due to high common mode rejection voltage (CMR:MIN. 10kV/µs) 3. Mini-flat package 4. Isolation voltage (Viso:3 750Vrms) 5. Recognized by UL, file No. 64380 ■ Applications 1. Programmable controllers 2. Facsimil

文件：63.1 Kbytes 页数：5 Pages

SHARPSharp Corporation

夏普

Mini-flat Package High CMR, Low Input Current Type Photocoupler

■ Description PC367NJ0000F contains an IRED optically coupled to a phototransistor. It is packaged in a 4-pin mini-flat. Low input current type. Input-output isolation voltage(rms) is 3.75kV. Collector-emitter voltage is 80V and CTR is 100 to 500 at input current of 0.5mA. ■ Features 1. 4-p

文件：211.52 Kbytes 页数：15 Pages

SHARPSharp Corporation

夏普

Low Input Current Type Photocoupler

Sharp

夏普

PC367NTJ000F - 光电耦合器, Transistor Output, 1通道, SOP, 4 引脚, 10 mA, 3.75 kV, 100 %

The PC367NTJ000F is a 1-channel PC367NJ0000F series low input current DC Input Photocoupler contains an IRED optically coupled to a phototransistor. Collector-emitter voltage is 80V and CTR is 100% to 500% at input current of 0.5mA. While operating at IF<0.5mA, CTR variation may increase. In ·50mA Maximum collector current\n·Reflow, flow and hand soldering method\n·Solvent cleaning\n·Ultrasonic cleaning\n·Hand soldering should be completed within 3s when the point of solder iron is below 400°C;

Sharp

夏普