Transient Voltage Suppressors

Features 1. Halogen-free 2. Rohs compliant 3. Typical maximum temperature coefficient 4. ΔVBR = 0.1 x VBR@25°C x ΔT 5. Glass passivated Chip junction in DO-214AA package 6. 600W peak pulse capadility at 10×1000μs waveform, repetition rate(duty cycles):0.01 7. Fast response time:typically le

文件：827.5 Kbytes 页数：7 Pages

RUILONRUILONGYUAN ELECTRONICS

瑞隆源深圳市瑞隆源电子有限公司

Surface Mount Transient Voltage Suppressors (TVS)

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional un

文件：580.41 Kbytes 页数：6 Pages

SOCAY

硕凯股份

丝印：11C；Package：DO-214AA；6.8 To 600V 600W Surface Mount Transient Voltage Suppressors (TVS)

Features For surface mounted applications in order to optimize board space Low leakage Uni and Bidirectional unit Glass passivated junction Low inductance Excellent clamping capability Typical IR less than 5μA above 10V 600W Peak power capability at 10 × 1000μs waveform Repetition rate (d

文件：3.66251 Mbytes 页数：7 Pages

UNSEMI

优恩半导体

Surface Mount Transient Voltage Suppressors (TVS)

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Features ✦ For surface mounted applications in order to optimize board space ✦ Low leakage ✦ Uni and Bidirectional u

文件：703.16 Kbytes 页数：6 Pages

UNSEMI

优恩半导体

Excellent clamping capability

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD

文件：195.44 Kbytes 页数：6 Pages

SEMITECH

海晨启半导体

Excellent clamping capability

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4-2 ESD

文件：479.67 Kbytes 页数：5 Pages

SEMITECH

海晨启半导体

Transient Voltage Suppressors

FEATURES ◇ For surface mounted applications in order to optimize board space. ◇ Low profile package. ◇ Built-in strain relief. ◇ Glass passivated junction. ◇ Low inductance. ◇ Excellent clamping capability. ◇ Repetition Rate (duty cycle): 0.01. ◇ Fast response time: typically less than 1.0

文件：262.15 Kbytes 页数：4 Pages

MERITEK

TRANSIENT VOLTAGE SUPPRESSOR 600W SURFACE MOUNT

DESCRIPTION The P6SMB i s available in SM B p a ckage MECHANICAL DATA Case: SMB Terminals: Solderable per MIL STD 750, Method 2026 Approx. Weight: 0.055g / 0.002oz FEATURES ⚫ For surface mounted applications in order to optimize board space. ⚫ Low profile package ⚫ Glass passivated

文件：409.35 Kbytes 页数：7 Pages

AITSEMI

创瑞科技

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1μA above 10V * Pb / RoHS Free

文件：250.51 Kbytes 页数：3 Pages

BWTECH

Transient Voltage Suppression Diodes

Description The P6SMB series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Applications TVS devices are ideal for the protection of I/O Interfaces, VCC bus and other vulnerable circ

文件：143.7 Kbytes 页数：5 Pages

Littelfuse

力特