Transient Voltage Suppression Diodes

Description The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit

文件：139.11 Kbytes 页数：5 Pages

LITTELFUSE

力特

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 550 Volts 600 Watt Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94 V-O • Glass passivated chip junction in DO-15 (DO-204AC) package • 600W surge capability at 10/1000 µs • Low zenen impedance • E

文件：78.2 Kbytes 页数：3 Pages

MDE

TRANSIENT VOLTAGE SUPPRESSOR

FEATURES Available in uni-directional & bi-directional 600W surge capability at 10x100 s waveform, duty cycle: 0.01% High temperature soldering capability 250 / 10 seconds/.375”(9.5mm) lead length/5lbs.,(2.3kg) tension Glass passivated chip junction Low zener impedance Fast response t

文件：377.56 Kbytes 页数：4 Pages

RFE

RFE international

Unidirectional and bidirectional Transient Voltage Suppressor diodes

Unidirectional and bidirectional Transient Voltage Suppressor diodes Pulse Power Dissipation: 600 W Maximum Stand-off voltage: 162 ... 423 V Features • Max. solder temperature 260°C • Plastic material has UL classification 94V-0 • For bidirectional types (suffix C or A), electrical character

文件：146.42 Kbytes 页数：2 Pages

SEMIKRON

赛米控丹佛斯

P6KE Series

Features: • Plastic package • Exceeds environmental standards of MIL-STD-19500 • 600 W surge capability at 10 × 1,000 μs waveform, duty cycle: 0.01% • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 V to VBR for unidirectional a

文件：434.18 Kbytes 页数：6 Pages

MULTICOMP

易络盟

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-6.8 to 440 Volts?

VOLTAGE - 6.8 to 440 Volts 600 Watts Peak Power 5.0 Watt Steady State FEATURES • Plastic package has Underwriters Laboratory Flammability Classifications 94V-O • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast respones time : typically less than

文件：201.49 Kbytes 页数：4 Pages

SURGE

Transient Voltage Suppressor Diodes

Features ◇ UL Recognized File # E-326243 ◇ Excellent clamping capability ◇ Low Dynamic impedance ◇ Typical IR less than 1uA above 10V ◇ Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional ◇ High temperature soldering gua

文件：98.73 Kbytes 页数：4 Pages

TSC

台湾半导体

600W Transient Voltage Suppressors

Peak Pulse Power 600 Watt Stand-off Voltage 6.8 To 440 VOLTS Feature: * 600 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping CapabilityFast Response Time * High Temperat Soldering Guaranteed : 265 C/10 sec/.375. (9.5mm) Lead Length, 51bs., (2

文件：104.05 Kbytes 页数：3 Pages

WEITRON

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-15 package. ◇ 600W peak pulse power capability on 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR

文件：304 Kbytes 页数：4 Pages

MERITEK

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 459V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Pb − Free Device All

文件：379.36 Kbytes 页数：5 Pages

SMCDIODE

桑德斯微电子