Transient Voltage Suppression Diodes

Description The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Applications TVS devices are ideal for the protection of I/O interfaces, VCC bus and other vulnerable circuit

文件：139.11 Kbytes 页数：5 Pages

LITTELFUSE

力特

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR(VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State)

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ●

文件：62.47 Kbytes 页数：6 Pages

PANJIT

強茂

Voltage 6.8V ~ 480V 600 Peak Power / 5.0W Steady State 600W Peak Power TVS

FEATURES * 600 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

文件：110.25 Kbytes 页数：3 Pages

SECOS

喜可士

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

文件：401.09 Kbytes 页数：3 Pages

SYNSEMI

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ● Low zener impeda

文件：211.58 Kbytes 页数：5 Pages

TRSYS

Transys Electronics

600W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 600W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

文件：62.05 Kbytes 页数：5 Pages

WTE

Won-Top Electronics

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 to 600 Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

文件：83.99 Kbytes 页数：3 Pages

ZOWIE

智威

Glass passivated junction

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4

文件：503.57 Kbytes 页数：4 Pages

SEMITECH

海晨启半导体

600W Peak Pulse Power Dissipation

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4

文件：280.14 Kbytes 页数：5 Pages

SEMITECH

海晨启半导体

TRANSIENT VOLTAGE SUPPRESSORS

Features ● Economical series ● Available in both unidirectional and bidirectional construction ● 6.8 to 440 stand-off volts available ● 600 watts peak pulse power dissipation APPLICATION This TVS is an economical, molded, commercial product voltage sensitive components from d

文件：1.07134 Mbytes 页数：3 Pages

TAYCHIPST

泰迪斯电子