Voltage 6.8V ~ 480V 600 Peak Power / 5.0W Steady State 600W Peak Power TVS

FEATURES * 600 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1 A above 10V * High temperature soldering guaranteed: 260 °C / 10 seconds / .375(9.5mm) lead lengt

文件：110.25 Kbytes 页数：3 Pages

SECOS

喜可士

TRANSIENT VOLTAGE SUPPRESSOR

VBR : 6.8 - 440 Volts PPK : 600 Watts FEATURES : * 600W surge capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) * Typical IR less then 1mA above 10V

文件：401.09 Kbytes 页数：3 Pages

SYNSEMI

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE - 6.8 TO 440 Volts 600Watt Peak Power 5.0 Watt Steady State FEATURES ● Plastic package has Underwriters Laboratory Flammability Classification 94V-O ● Glass passivated chip junction in DO-15 package ● 600W surge capability at 1ms ● Excellent clamping capability ● Low zener impeda

文件：211.58 Kbytes 页数：5 Pages

TRSYS

Transys Electronics

600W TRANSIENT VOLTAGE SUPPRESSORS

Features ● Glass Passivated Die Construction ● 600W Peak Pulse Power Dissipation ● 6.8V – 440V Standoff Voltage ● Uni- and Bi-Directional Versions Available ● Excellent Clamping Capability ● Fast Response Time ● Plastic Case Material has UL Flammability Classification Rating 94V-O

文件：62.05 Kbytes 页数：5 Pages

WTE

Won-Top Electronics

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

Breakdown Voltage - 6.8 to 600 Volts Peak Pulse Power-600 Watts FEATURES * Glass passivated chip * 600 W peak pulse power capability with a 10/1000 µs wavefrom, repetitive rate (duty cycle) : 0.01 * Low leakage * Excellent clamping capability * Very fast response time

文件：83.99 Kbytes 页数：3 Pages

ZOWIE

智威

Glass passivated junction

Features ● Peak power dissipation 600W @10 x 1000 us Pulse ● Low profile package. ● Excellent clamping capability. ● Glass passivated junction. ● Fast response time: typically less than 1ps from 0 Volts to BV min ● Typical IR less than 1uA when VBR min above 12V. ● IEC 61000-4

文件：503.57 Kbytes 页数：4 Pages

SEMITECH

海晨启半导体

TRANSIENT VOLTAGE SUPPRESSORS

Features ● Economical series ● Available in both unidirectional and bidirectional construction ● 6.8 to 440 stand-off volts available ● 600 watts peak pulse power dissipation APPLICATION This TVS is an economical, molded, commercial product voltage sensitive components from d

文件：1.07134 Mbytes 页数：3 Pages

TAYCHIPST

泰迪斯电子

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Typical IR less than 1µA above 10V • 600W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time: typically less than 1.0 ps from 0 volts to BV min • Pb fre

文件：1.20377 Mbytes 页数：4 Pages

YEASHIN

亚昕科技

Transient Voltage Suppressors

FEATURES ◇ Plastic package. ◇ Glass passivated chip junction in DO-15 package. ◇ 600W peak pulse power capability on 10/1000μs waveform. ◇ Excellent clamping capability. ◇ Low zener impedance. ◇ Fast response time: typically less than 1.0ps from 0 volt to BV min. ◇ Typical IR

文件：304 Kbytes 页数：4 Pages

MERITEK

TRANSIENT VOLTAGE SUPPRESSOR

Glass Passivated Die Construction 600W Peak Pulse Power Dissipation 5.8V- 459V Standoff Voltage Uni- and Bi-Directional Versions Available Excellent Clamping Capability Fast Response Time Plastic Case Material has UL Flammability Classification Rating 94V-O This is a Pb − Free Device All

文件：379.36 Kbytes 页数：5 Pages

SMCDIODE

桑德斯微电子