Unidirectional and bidirectional Transient Voltage Suppressor Diodes

Unidirectional and bidirectional Transient Voltage Suppressor Diodes • Peak pulse power dissipation 600 W • Nominal breakdown voltage 6.8...520 V • Plastic case DO-15 • Weight approx. 0.4 g • Plastic mat

文件：154.98 Kbytes 页数：4 Pages

DIOTEC

德欧泰克

600 Watts Transient Voltage Suppressor Diodes

Features ◇ UL Recognized File # E-96005 ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Exceeds environmental standards of MIL-STD-19500 ◇ 600W surge capability at 10 x 100 us waveform, duty cycle: 0.01 ◇ Excellent clamping capability ◇ Low zener

文件：368.4 Kbytes 页数：4 Pages

FUJI

富士通

Transient Voltage Suppressors

Features ◆ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◆ Glass passivated junction ◆ 600W peak pulse power capabililty with a 10/1000us waveform, repetition rate (duty cycle): 0.01 ◆ Excellent clamping capability ◆ Low incremental surge resistance ◆ Very fas

文件：257.769 Kbytes 页数：4 Pages

GOOD-ARK

固锝电子

Silicon Avalanche Diodes - Silicon Avalanche Diodes

Protect sensitive electronics against voltage transients induced by inductive load switching and lightning. Ideal for the protection of I/O interfaces, Vcc bus, and other integrated circuits. FEATURES • Breakdown voltage range 6.8 to 440 Volts • Uni-directional and Bi-directional

文件：406.77 Kbytes 页数：5 Pages

LITTELFUSE

力特

Transient Voltage Suppression Diodes

The P6KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events. Description Features • 600W peak pulse capability at 10/1000μs waveform, repetition rate (duty cycles):0.01% • Glass pa

文件：1.01248 Mbytes 页数：6 Pages

LITTELFUSE

力特

Transient Voltage Suppressor Diodes

Features ◇ UL Recognized File # E-326243 ◇ Excellent clamping capability ◇ Low Dynamic impedance ◇ Typical IR less than 1uA above 10V ◇ Fast response time: Typically less than 1.0ps from 0 volt to VBR for unidirectional and 5.0ns for bidirectional ◇ High temperature soldering gua

文件：98.73 Kbytes 页数：4 Pages

TSC

台湾半导体

600W Transient Voltage Suppressors

Peak Pulse Power 600 Watt Stand-off Voltage 6.8 To 440 VOLTS Feature: * 600 Watt Peak Power Dissipation * Glass Passivated Die Construction * Excellent Clamping CapabilityFast Response Time * High Temperat Soldering Guaranteed : 265 C/10 sec/.375. (9.5mm) Lead Length, 51bs., (2

文件：104.05 Kbytes 页数：3 Pages

WEITRON

600 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 600 Watts Peak Power 5.0 Watts Steady State FEATURES * 600 Watts Surge Capability at 1ms * Excellent clamping capability * Low zener impedance * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Typical IR less than 1μA above 10V * High

文件：305.9 Kbytes 页数：4 Pages

BYTES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 440 VOLTS 600 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 400W surge capability at 1 ms • Excellent clamping capability

文件：126 Kbytes 页数：2 Pages

CHENG-YI

辰頤电子

TRANSIENT VOLTAGE SUPPRESSORS

Voltage Range 6.8 to 400V 500W Peak Power 5.0W Steady State FEATURE . Plastic package has Underwriters Laboratory Flammability Classification 94V-0 . 500W surge capability at10×100us waveform, Duty cycle:0.01 . Excellent clamping capability . Low zener impedance . Fast re

文件：249.76 Kbytes 页数：3 Pages

CHONGQING

平伟实业