TRANSIENT VOLTAGE SUPPRESSOR

BREAKDOWN VOLTAGE: 6.8 --- 440 V PEAK PULSE POWER: 400 W FEATURES ◇ Plastic package has Underwriters Laboratory Flammability Classification 94V-0 ◇ Glass passivated junction ◇ 400W peak pulse power capability with a 10/1000μs waveform, repetition rate (duty cycle): 0.01 ◇ Excellent clamping

文件：138.43 Kbytes 页数：4 Pages

BILIN

银河微电

400 WATT PEAK POWER TRANSIENT VOLTAGE SUPPRESSORS

VOLTAGE RANGE 6.8 to 440 Volts 400 Watts Peak Power 1.0 Watts Steady State FEATURES * 400 Watts Surge Capability at 1ms * Excellent clamping capability * Fast response time: Typically less than 1.0ps from 0 volt to BV min. * Low zener impedance * Typical IR less than 1mA above 10V * High

文件：307.59 Kbytes 页数：4 Pages

BYTES

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

VOLTAGE 6.8 to 144 VOLTS 400 WATT PEAK POWER 1.0 WATTS STEADY STATE FEATURES • Plastic package has Underwrites Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-15 package • 400W surge capability at 1 ms • Excellent clamping capability • Low zener impe

文件：126.08 Kbytes 页数：2 Pages

CHENG-YI

辰頤电子

400 Watt Transient voltage suppressors 6.8to400 volts

Features ● Unidirectional And Bidirectional ● Low Inductance ● High Temp Soldering: 250°C for 10 Seconds At Terminals ● For Bidirectional Devices Add “C” To The Suffix Of The Part Number: i.e. P4KE6.8C or P4KE6.8CA for 5 Tolerance Devices

文件：70.09 Kbytes 页数：3 Pages

CHENYI

商朗电子

400W Transient Voltage Suppressor

Stand-off Voltage: 6.8 ~ 440V Power Dissipation: 440 Walts Features: ● Glass passivated chip ● Low leakage ● Uni and Bidirection unit ● Excellent clamping capability ● The plastic material has UL recognition 94V-0 ● Fast response time

文件：99.2 Kbytes 页数：4 Pages

COMCHIP

典琦

400 Watts Transient Voltage Suppressor Diodes

Features ◇ 400W surge capability at 10 x 100us waveform, duty cycle: 0.01 ◇ Excellent clamping capability ◇ Low zener impedance ◇ Fast response time: Typically less than 1.0ps from 0 volts to VBR for unidirectional and 5.0 ns for bidirectional ◇ Typical IR less than 1 uA above 10V ◇ High tem

文件：411.52 Kbytes 页数：4 Pages

LUGUANG

鲁光电子

TRANSIENT VOLTAGE SUPPRESSOR (TVS)

FEATURES ● Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. ● Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. ● For Bidirectional construction, indicate a C or CA suffix after part number, i.

文件：422.29 Kbytes 页数：4 Pages

DIGITRON

TECHNICAL SPECIFICATIONS OF TRANSIENT VOLTAGE SUPPRESSOR

Reverse Voltage - 6.8 to 440 Volts PEAK PULSE POWER-400 Watts FEATURES • Glass passivated junction • 400 Watts Pulse capability on 10/1000 μs wave form • Excellent clamping capability • Low zener impedance • Fast response time • High temperature soldering guaranteed: 260 C/10 seconds at te

文件：334.22 Kbytes 页数：4 Pages

GXELECTRONICS

星合电子

Transient Voltage Suppressor

VBR : 6.8 - 550 Volts PPK : 400 Watts Features • 400W surge capability at 1ms • Excellent clamping capability • Low zener impedance • Fast response time : typically less then 1.0 ps from 0 volt to VBR(min.) • Typical IR less then 1μA above 10V • RoHS compliant package Applications • For

文件：408.49 Kbytes 页数：7 Pages

BWTECH

GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR

400 Watt Peak Power 1.0 Watt Steady State VOLTAGE- 6.8 to 540 Volts FEATURES • Plastic package has Underwriters Laboratory Flammability Classification 94V-O • Glass passivated chip junction in DO-41 package • 600W surge capability at 1ms • Excellent clamping capability • Low zener imped

文件：983.2 Kbytes 页数：4 Pages

YEASHIN

亚昕科技