P1012

single- and dual-core communications processors

FreescaleQorIQcommunicationsplatformsarethenext-generationevolutionofourleadingPowerQUICCcommunicationsprocessors.Builtusinghigh-performancePowerArchitecture®cores,QorIQplatformsenableaneweraofnetworkinginnovationwherethereliability,securityandqualityofservicef

P1012AP

Self-Supplied Monolithic Switcher for Low Standby- Power Offline SMPS

TheNCP101Xseriesintegratesafixed−frequencycurrent−mode controlleranda700VMOSFET.HousedinaPDIP−7orSOT−223 package,theNCP101Xofferseverythingneededtobuildaruggedand low−costpowersupply,includingsoft−start,frequencyjittering, short−circuitprotection,skip−cycle,

P1012AP06

Self-Supplied Monolithic Switcher for Low Standby- Power Offline SMPS

TheNCP101Xseriesintegratesafixed−frequencycurrent−mode controlleranda700VMOSFET.HousedinaPDIP−7orSOT−223 package,theNCP101Xofferseverythingneededtobuildaruggedand low−costpowersupply,includingsoft−start,frequencyjittering, short−circuitprotection,skip−cycle,

P1012AP10

Self-Supplied Monolithic Switcher for Low Standby- Power Offline SMPS

TheNCP101Xseriesintegratesafixed−frequencycurrent−mode controlleranda700VMOSFET.HousedinaPDIP−7orSOT−223 package,theNCP101Xofferseverythingneededtobuildaruggedand low−costpowersupply,includingsoft−start,frequencyjittering, short−circuitprotection,skip−cycle,

P1012AP13

Self-Supplied Monolithic Switcher for Low Standby- Power Offline SMPS

TheNCP101Xseriesintegratesafixed−frequencycurrent−mode controlleranda700VMOSFET.HousedinaPDIP−7orSOT−223 package,theNCP101Xofferseverythingneededtobuildaruggedand low−costpowersupply,includingsoft−start,frequencyjittering, short−circuitprotection,skip−cycle,

P1012NSE2HFB

QorIQ, Power Arch 32-Bit SoC, 800MHz, GbE, DDR2/3 w/ECC, QE, PCIe, USB, TDM, SEC, 0 to 125C, Rev 1.1; Core Complex• Dual (P1021) or single (P1012) high-performance Power Architecture® e500 cores, 32 KB L1 cache, up to 800 MHz\n• 256 KB L2 cache with ECC, also configurable as SRAM and stashing memory\n;

The QorIQ® P1 platform series, which includes the P1021 (dual-core) and P1012 (single-core) communications processors, offers the value of extensive integration and extreme power for a wide variety of applications in the networking, telecom, defense and industrial markets. Based on 45 nm technology for low-power implementation, the P1012 and P1021 processors provide single- and dual-core solutions for the 533 MHz to 800 MHz performance range, along with advanced security and a rich set of interfaces.\nThe P1012 and P1021 processors incorporate QUICC Engine® technology and are perfectly suited for multi-service gateways, Ethernet switch controllers, wireless LAN access points and high-performance general purpose control processor applications with tight thermal constraints. The QorIQ P1012 and P1021 processors are pin-compatible with the P1011, P1020 and P2 platform products, offering a six-chip range of cost-effective solutions. Scaling from a single core at 533 MHz (P1012) to a dual core at 1.2 GHz per core (P2020), the two QorIQ platforms deliver an impressive 4.5x aggregate frequency range.\n

恩XP

P1012NSN2DFB

QorIQ, Power Arch 32-Bit SoC, 533MHz, GbE, DDR2/3 w/ECC, QE, PCIe, USB, TDM, 0 to 125C, Rev 1.1; Core Complex• Dual (P1021) or single (P1012) high-performance Power Architecture® e500 cores, 32 KB L1 cache, up to 800 MHz\n• 256 KB L2 cache with ECC, also configurable as SRAM and stashing memory\n;

The QorIQ® P1 platform series, which includes the P1021 (dual-core) and P1012 (single-core) communications processors, offers the value of extensive integration and extreme power for a wide variety of applications in the networking, telecom, defense and industrial markets. Based on 45 nm technology for low-power implementation, the P1012 and P1021 processors provide single- and dual-core solutions for the 533 MHz to 800 MHz performance range, along with advanced security and a rich set of interfaces.\nThe P1012 and P1021 processors incorporate QUICC Engine® technology and are perfectly suited for multi-service gateways, Ethernet switch controllers, wireless LAN access points and high-performance general purpose control processor applications with tight thermal constraints. The QorIQ P1012 and P1021 processors are pin-compatible with the P1011, P1020 and P2 platform products, offering a six-chip range of cost-effective solutions. Scaling from a single core at 533 MHz (P1012) to a dual core at 1.2 GHz per core (P2020), the two QorIQ platforms deliver an impressive 4.5x aggregate frequency range.\n

恩XP

P1012NSN2HFB

QorIQ, Power Arch 32-Bit SoC, 800MHz, GbE, DDR2/3 w/ECC, QE, PCIe, USB, TDM, 0 to 125C, Rev 1.1; Core Complex• Dual (P1021) or single (P1012) high-performance Power Architecture® e500 cores, 32 KB L1 cache, up to 800 MHz\n• 256 KB L2 cache with ECC, also configurable as SRAM and stashing memory\n;

The QorIQ® P1 platform series, which includes the P1021 (dual-core) and P1012 (single-core) communications processors, offers the value of extensive integration and extreme power for a wide variety of applications in the networking, telecom, defense and industrial markets. Based on 45 nm technology for low-power implementation, the P1012 and P1021 processors provide single- and dual-core solutions for the 533 MHz to 800 MHz performance range, along with advanced security and a rich set of interfaces.\nThe P1012 and P1021 processors incorporate QUICC Engine® technology and are perfectly suited for multi-service gateways, Ethernet switch controllers, wireless LAN access points and high-performance general purpose control processor applications with tight thermal constraints. The QorIQ P1012 and P1021 processors are pin-compatible with the P1011, P1020 and P2 platform products, offering a six-chip range of cost-effective solutions. Scaling from a single core at 533 MHz (P1012) to a dual core at 1.2 GHz per core (P2020), the two QorIQ platforms deliver an impressive 4.5x aggregate frequency range.\n

恩XP