OPT4001-Q1中文资料德州仪器数据手册PDF规格书

1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature grade 2: –40°C to +105°C, TA

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• High-precision, high-speed light-to-digital

conversion over high-speed I2C interface

• Precision optical filtering to closely match human

eye with excellent near infrared (IR) rejection

• Semi-logarithmic output with nine binary

logarithmic full-scale light range and highly linear

response within each range

• Built-in automatic full-scale light range selection

logic, which switches measurement range based

on input light condition for the best possible

resolution at all times

• 28 bits of effective dynamic range from 400 μlux to

107 klux

• 12 configurable conversion times from 600 μs

to 800 ms for high speed and high precision

applications

• External pin interrupt for hardware synchronized

trigger and interrupts

• Error Correction Code features for improved

reliability in automotive use cases

• Internal FIFO for output registers with I2C burst

readout

• Low operating current: 30 μA

• Ultra-low power standby: 2 μA

• Operating temperature range: –40°C to +105°C

• Wide power-supply range: 1.6 V to 3.6 V

• 5.5-V Tolerant I/O pins

• Selectable I2C address

• Small-form factor: 2 mm × 2 mm × 0.65 mm

2 Applications

• Automotive interior and exterior lighting

• Infotainment and cluster

• Electro-chromatic and smart mirrors

• Wiper modules

• Head-up display systems

• Automotive camera systems

3 Description

The OPT4001-Q1 is a light-to-digital sensor (single

chip lux meter) that measures the intensity of visible

light. To measure accurate light intensity, a specially

engineered filter on the device tightly matches the

photopic response of the human eye and rejects the

near-infrared component from common light sources.

The output of OPT4001-Q1 is semi-logarithmic with

nine binary logarithmic full-scale light ranges along

with a highly linear response within each range,

bringing capability to measure from 400 μlux to 107

klux. This capability allows light sensor to have 28-bit

effective dynamic range. The built-in automatic range

selection logic dynamically adjusts the device gain

settings based on the light level, providing the best

possible resolution in all conditions without user input.