OPT4001传感器变送器的光学传感器-环境光IR红外线UV紫外线传感器规格书PDF中文资料

1 Features

• AEC-Q100 qualified for automotive applications:

– Temperature grade 2: –40°C to +105°C, TA

• Functional Safety-Capable

– Documentation available to aid functional safety

system design

• High-precision, high-speed light-to-digital

conversion over high-speed I2C interface

• Precision optical filtering closely matches human

eye with excellent near infrared (IR) rejection

• Semi-logarithmic output:

– Nine binary logarithmic full-scale light range

– Highly linear response within each range

• Built-in automatic full-scale light range selection

logic, which switches measurement range based

on input light condition for best possible resolution

at all times

• 28 bits of effective dynamic range:

– 400 μlux to 107 klux

• 12 configurable conversion times:

– 600 μs to 800 ms for high-speed and highprecision

applications

• External pin interrupt for hardware-synchronized

trigger and interrupts

• Error correction code features for improved

reliability in automotive use cases

• Internal FIFO for output registers with I2C burst

readout

• Low operating current: 30 μA

• Ultra-low power standby: 2 μA

• Operating temperature range: –40°C to +105°C

• Wide power-supply range: 1.6 V to 3.6 V

• 5.5-V tolerant I/O pins

• Selectable I2C address

• Small-form factor: 2 mm × 2 mm × 0.65 mm

2 Applications

• Automotive interior and exterior lighting

• Infotainment and cluster

• Electrochromatic and smart mirrors

• Wiper modules

• Head-up display systems

• Automotive camera systems

3 Description

The OPT4001-Q1 is a light-to-digital sensor (single

chip lux meter) that measures the intensity of visible

light. To measure accurate light intensity, a specially

engineered filter on the device tightly matches the

photopic response of the human eye and rejects the

near-infrared component from common light sources.

The output of OPT4001-Q1 is semi-logarithmic with

nine binary logarithmic full-scale light ranges along

with a highly linear response within each range,

bringing capability to measure from 400 μlux to 107

klux. This capability allows light sensor to have 28-bit

effective dynamic range. The built-in automatic range

selection logic dynamically adjusts the device gain

settings based on the light level, providing the best

possible resolution in all conditions without user input.