OPA333AQDBVRQ1中文资料德州仪器数据手册PDF规格书

1 Features

1• AEC-Q100 qualified for automotive applications:

– Temperature grade 1: –40°C to +125°C, TA

• Low offset voltage: 10 μV (maximum)

• 0.01-Hz to 10-Hz noise: 1.1 μVPP

• Quiescent current: 17 μA

• Single-supply operation

• Supply voltage: 1.8 V to 5.5 V

• Rail-to-rail input and output

• Microsize 5-pin SOT-23 (DBV) package

2 Applications

• Pump

• Position sensor

• Vehicle occupant detection sensor

• Brake system

• Airbag

3 Description

The OPA333-Q1 CMOS operational amplifier uses a

proprietary autocalibration technique to

simultaneously provide verylow offset voltage (10 μV

maximum) and near-zero drift over time and

temperature. This miniature, high-precision, lowquiescent-

current amplifier offers high-impedance

inputs that have a common-mode range 100 mV

beyond the rails, and rail-to-rail output that swings

within 50 mV of the rails. The device can use single

or dual supplies as low as 1.8 V (±0.9 V) and up to

5.5 V (±2.75 V), and is optimized for low-voltage

single-supply operation.

The OPA333-Q1 device offers excellent commonmode

rejection ratio (CMRR) without the crossover

associated with traditional complementary input

stages. This design results in superior performance

for driving analog-to-digital converters (ADCs) without

degradation of differential linearity.