OPA333-Q1

汽车类 1.8V 输入电压、17uA、2uV、微功耗 CMOS 零漂移系列运算放大器; • AEC-Q100 qualified for automotive applications: \n• Temperature grade 1: –40°C to +125°C, TA\n \n• Low offset voltage: 10 µV (maximum)\n• 0.01-Hz to 10-Hz noise: 1.1 µVPP \n• Quiescent current: 17 µA\n• Single-supply operation\n• Supply voltage: 1.8 V to 5.5 V\n• Rail-to-rail input and output\n• Microsize 5-pin SOT-23 (DBV) package;

The OPA333-Q1 CMOS operational amplifier uses a proprietary autocalibration technique to simultaneously provide verylow offset voltage (10 µV maximum) and near-zero drift over time and temperature. This miniature, high-precision, low-quiescent-current amplifier offers high-impedance inputs that have a common-mode range 100 mV beyond the rails, and rail-to-rail output that swings within 50 mV of the rails. The device can use single or dual supplies as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V), and is optimized for low-voltage single-supply operation.\n\nThe OPA333-Q1 device offers excellent common-mode rejection ratio (CMRR) without the crossover associated with traditional complementary input stages. This design results in superior performance for driving analog-to-digital converters (ADCs) without degradation of differential linearity.\n\n 

OPA333-Q1

1.8-V, microPower, CMOS Operational Amplifiers, Zero-Drift Series

OPA333-Q1

1.8-V MICROPOWER CMOS OPERATIONAL AMPLIFIER ZERO-DRIFT SERIES

OPA333-Q1

1.8-V MICROPOWER CMOS OPERATIONAL AMPLIFIER ZERO-DRIFT SERIES

OPA333-Q1_15

1.8-V MICROPOWER CMOS OPERATIONAL AMPLIFIER ZERO-DRIFT SERIES

INA333-Q1

Micro-Power,Zerø-Drift,Rail-to-RailOutInstrumentationAmplifier

FEATURES •LowOffsetVoltage:25μV(maxat25°C), G≥100 •LowDrift:0.2μV/°C,G≥1000 •LowNoise:55nV/√Hz,G≥100 •HighCMRR:100dB(minat25°C),G≥10 •SupplyRange:+1.8Vto+5.5V •InputVoltage:(V–)+0.1Vto(V+)–0.1V •OutputRange:(V–)+0.05Vto(V+)–0.05V •

INA333-Q1

INA333-Q1Automotive,Zer첩-Drift,micro-Power,InstrumentationAmplifier