OPA210

2.2nV/√Hz 低功耗 36V 运算放大器; • 精密超级 ß 输入性能： \n• 低失调电压：5µV（典型值）\n• 超低温漂：0.1µV/°C（典型值）\n• 低输入偏置电流：0.3nA（典型值）\n \n• 超低噪声： \n• 0.1Hz 至 10Hz 低噪声：90nVPP \n• 低电压噪声：1kHz 时为 2.2nV/√Hz \n \n• 高 CMRR：132dB（最小值）\n• 增益带宽积：18MHz\n• 压摆率：6.4 V/µs\n• 低静态电流：2.5mA/每通道（最大值）\n• 短路电流：±65 mA\n• 宽电源电压范围：±2.25V 至 ±18V\n• 无相位反转\n• 轨到轨输出\n• 业界通用封装;

OPA210 和 OPA2210 ( OPAx210) 是 OPAx209 运算放大器的新一代产品。 OPAx210 精密运算放大器基于 TI 的精密超级 ß 互补双极半导体工艺进行构建，可提供超低闪烁噪声、低失调电压和低失调电压温漂。\n\n OPAx210 可实现很低的电压噪声密度 (2.2nV/√Hz)，同时每个放大器仅消耗 2.5mA（最大值）的电流。这两款器件还提供轨到轨输出摆幅，有助于更大限度地扩大动态范围。\n\n在精密数据采集应用中， OPAx210 可实现精度达 16 位的快速稳定时间，即使输出摆幅为 10V 也是如此。出色的交流性能、仅 35µV（最大值）的失调电压和 0.6µV/°C（最大值）的温漂使 OPAx210 非常适用于高速、高精度应用。\n\n OPAx210 可在 ±2.25V 至 ±18V 的双电源宽电压范围或 4.5V 至 36V 的单电源宽电压范围内运行，并且具有 –40°C 至 +125°C 的额定工作温度范围。

OPA210

OPAx210 2.2-nV/?숰z Precision, Low-Power, 36-V Operational Amplifiers

OPA210

OPAx210 2.2-nV/?숰z Precision, Low-Power, 36-V Operational Amplifiers

OPA210

OPAx210 2.2-nV/?숰z Precision, Low-Power, 36-V Operational Amplifiers

OPA2107

双通道、30V、4.5MHz 运算放大器; • Very Low Noise: 8nV/Hz at 10kHz\n• Low VOS: 1mV max\n• Low Drift: 10 µV/°C max\n• Low IB: 10pA max\n• Fast Settling Time: 2 µs to 0.01%\n• Unity-Gain Stable\n• APPLICATIONS \n• Data Acquisition\n• DAC Output Amplifiers\n• Optoelectronics\n• High-Impedance Sensor Amps\n• High-Performance Audio Circuitry\n• Medical Equipment, CT Scanners;

The OPA2107 dual operational amplifier provides precision Difet performance with the cost and space savings of a dual op amp. It is useful in a wide range of precision and low-noise analog circuitry and can be used to upgrade the performance of designs currently using BIFET® type amplifiers.\n\n The OPA2107 is fabricated on a proprietary dielectrically isolated (Difet) process. This holds input bias currents to very low levels without sacrificing other important parameters, such as input offset voltage, drift and noise. Laser-trimmed input circuitry yields excellent dc performance. Superior dynamic performance is achieved, yet quiescent current is held to under 2.5mA per amplifier. The OPA2107 is unity-gain stable.\n\n The OPA2107 is available in DIP-8 and SO-8 packages.

OPA210_V01

OPAx210 2.2-nV/?숰z Precision, Low-Power, 36-V Operational Amplifiers

OPA210_V02

OPAx210 2.2-nV/?숰z Precision, Low-Power, 36-V Operational Amplifiers

OPA2107

Precision Dual Difet Operational Amplifier

OPA2107AP

Precision Dual Difet Operational Amplifier

OPA2107APG4

Precision Dual Difet Operational Amplifier