OPAx209 2.2-nV/√Hz, Low-Power, 36-V Operational Amplifier

1 Features 1• Low Voltage Noise: 2.2 nV/√Hz at 1 kHz • 0.1-Hz to 10-Hz Noise: 130 nVPP • Low Quiescent Current: 2.5 mA/Ch (Maximum) • Low Offset Voltage: 150 μV (Maximum) • Gain Bandwidth Product: 18 MHz • Slew Rate: 6.4 V/μs • Wide Supply Range: ±2.25 V to ±18 V, 4.5 V to 36 V • Rail-to-

文件：1.29445 Mbytes 页数：42 Pages

TI

德州仪器

Single-Supply, 10MHz, Rail-to-Rail Output, Low-Noise, JFET Amplifier

1FEATURES 2• Low Supply Current: 2.3mA max • Low Offset Drift: 10mV/°C max • Low Input Bias Current: 20pA max • Very Low 1/f Noise: 250nVPP • Low Noise: 6.5nV/√Hz • Wide Bandwidth: 10MHz • Slew Rate: 20V/ms • Input Voltage Range Includes V– • Rail-to-Rail Output • Single-Supply Operation

文件：1.31594 Mbytes 页数：36 Pages

TI

德州仪器

OPAx145 High-Precision, Low-Noise, Rail-to-Rail Output, 5.5-MHz JFET Operational Amplifiers

1 Features • Best bandwidth and slew-rate-to-power ratio: – gain-bandwidth product: 5.5 MHz – Slew rate: 20 V/μs – Low supply current: 475 μA (maximum) • High precision: – Very low offset: 150 μV (maximum) – Very low offset drift: 1 μV/°C (maximum) • Low input bias current: 2 pA • Excelle

文件：2.57384 Mbytes 页数：44 Pages

TI

德州仪器

OPAx189 Precision, Lowest-Noise, 36-V, Zero-Drift, 14-MHz, MUX-Friendly, Rail-to-Rail Output Operational Amplifiers

1 Features • Ultra-high precision: – Zero-drift: 0.005 μV/°C (OPA189) – Ultra-low offset voltage: 3 μV maximum (OPA189) • Excellent dc precision: – CMRR: 168 dB – Open-loop gain: 170 dB • Low noise: – en at 1 kHz: 5.2 nV/√Hz – 0.1-Hz to 10-Hz noise: 0.1 μVPP • Excellent dynamic performa

文件：3.84238 Mbytes 页数：58 Pages

TI

德州仪器

OPERATIONAL AMPLIFIER

文件：764.36 Kbytes 页数：25 Pages

TI

德州仪器

OPAx189 Precision, Lowest-Noise, 36-V, Zero-Drift, 14-MHz, MUX-Friendly, Rail-to-Rail Output Operational Amplifiers

文件：4.04215 Mbytes 页数：51 Pages

TI

德州仪器

单路、2.2nV/rtHz、18MHz、RRO、36V 精密运算放大器

The OPA209 series of precision operational amplifiers achieve very low voltage noise density (2.2 nV/√Hz) with a supply current of only 2.5 mA (maximum). This series also offers rail-to-rail output swing, which helps to maximize dynamic range.\n\nIn precision data acquisition applications, the OPA20 • Low Voltage Noise: 2.2 nV/√Hz at 1 kHz\n• Low Quiescent Current: 2.5 mA/Ch (Maximum)\n• Gain Bandwidth Product: 18 MHz\n• Wide Supply Range: ±2.25 V to ±18 V, 4.5 V to 36 V\n• Short-Circuit Current: ±65 mA\n• APPLICATIONS \n• Low-Noise, Low-Power Signal Processing\n• High-Performance ADC Drivers\n;

TI

德州仪器

丝印：OPA209A；Package：SOIC(D)；OPAx209 2.2-nV/√Hz, Low-Power, 36-V Operational Amplifier

1 Features 1• Low Voltage Noise: 2.2 nV/√Hz at 1 kHz • 0.1-Hz to 10-Hz Noise: 130 nVPP • Low Quiescent Current: 2.5 mA/Ch (Maximum) • Low Offset Voltage: 150 μV (Maximum) • Gain Bandwidth Product: 18 MHz • Slew Rate: 6.4 V/μs • Wide Supply Range: ±2.25 V to ±18 V, 4.5 V to 36 V • Rail-to-

文件：1.29445 Mbytes 页数：42 Pages

TI

德州仪器

丝印：OPA209A；Package：SOIC(D)；OPAx209 2.2-nV/√Hz, Low-Power, 36-V Operational Amplifier

1 Features 1• Low Voltage Noise: 2.2 nV/√Hz at 1 kHz • 0.1-Hz to 10-Hz Noise: 130 nVPP • Low Quiescent Current: 2.5 mA/Ch (Maximum) • Low Offset Voltage: 150 μV (Maximum) • Gain Bandwidth Product: 18 MHz • Slew Rate: 6.4 V/μs • Wide Supply Range: ±2.25 V to ±18 V, 4.5 V to 36 V • Rail-to-

文件：1.29445 Mbytes 页数：42 Pages

TI

德州仪器

丝印：OOBQ；Package：SOT-23(DBV)；OPAx209 2.2-nV/√Hz, Low-Power, 36-V Operational Amplifier

1 Features 1• Low Voltage Noise: 2.2 nV/√Hz at 1 kHz • 0.1-Hz to 10-Hz Noise: 130 nVPP • Low Quiescent Current: 2.5 mA/Ch (Maximum) • Low Offset Voltage: 150 μV (Maximum) • Gain Bandwidth Product: 18 MHz • Slew Rate: 6.4 V/μs • Wide Supply Range: ±2.25 V to ±18 V, 4.5 V to 36 V • Rail-to-

文件：1.29445 Mbytes 页数：42 Pages

TI

德州仪器