Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

文件：479.59 Kbytes 页数：20 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

文件：561.75 Kbytes 页数：24 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

文件：605.84 Kbytes 页数：24 Pages

AD

亚德诺

MicroConverter짰 12-Bit ADCs and DACs with Embedded High Speed 62-kB Flash MCU

文件：908.68 Kbytes 页数：88 Pages

AD

亚德诺

微功耗、单电源、轨到轨输入/输出运算放大器

新设计可考虑使用ADA4091-4\n\n 新设计建议考虑 ADA4091-4 ，它提供创新的过压保护功能、更宽的工作范围和更高的精度。\n\n OP191/OP291/OP491分别是单通道/双通道/四通道、微功耗、单电源、3 MHz带宽放大器，具有轨到轨输入与输出特性。所有器件均保证可采用3 V单电源和±5 V双电源工作。OP191系列采用ADI的CBCMOS工艺制造，具有独特的输入级，输入电压可以安全地超过任一电源电压10 V，而不会发生相位翻转或闩锁。输出电压摆幅可以达到电源电压的数毫伏范围内，并且可以持续提供吸电流或源电流，直到输出电压与电源电压相等。具体应用包 • 单电源供电：2.7 V至12 V\n\n• 宽输入电压范围\n\n• 轨到轨输出摆幅\n\n• 低电源电流：每个放大器 300 µA\n\n• 宽带宽：3 MHz\n\n• 压摆率: 0.5 Vµs\n\n• 低失调电压: 700 µ V\n\n• 无反相;

ADI

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

文件：479.59 Kbytes 页数：20 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

文件：479.59 Kbytes 页数：20 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

文件：561.75 Kbytes 页数：24 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

文件：561.75 Kbytes 页数：24 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

文件：561.75 Kbytes 页数：24 Pages

AD

亚德诺