Low Voltage, Micropower, Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：226.6 Kbytes 页数：16 Pages

AD

亚德诺

Low Voltage, Micropower, Quad Operational Amplifier

GENERAL DESCRIPTION The OP490 is a high-performance micropower quad op amp that operates from a single supply of 1.6 V to 36 V or from dual supplies of ±0.8 V to ±18 V. Input voltage range includes the negative rail allowing the OP490 to accommodate input signals down to ground in single-supply

文件：226.6 Kbytes 页数：16 Pages

AD

亚德诺

Low Voltage Micropower Quad Operational Amplifier

DESCRIPTION: Maxwell Technologies’ OP490 micropower quad operational amplifier microcircuit features Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP490 has an extremely low input offset voltage no less than 0.5 mV with a drift of under 5 µV/°C, guaranteed over the full milita

文件：249.78 Kbytes 页数：9 Pages

Maxwell

Low Voltage Micropower Quad Operational Amplifier

DESCRIPTION: Maxwell Technologies’ OP490 micropower quad operational amplifier microcircuit features Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP490 has an extremely low input offset voltage no less than 0.5 mV with a drift of under 5 µV/°C, guaranteed over the full milita

文件：249.78 Kbytes 页数：9 Pages

Maxwell

Low Voltage Micropower Quad Operational Amplifier

DESCRIPTION: Maxwell Technologies’ OP490 micropower quad operational amplifier microcircuit features Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP490 has an extremely low input offset voltage no less than 0.5 mV with a drift of under 5 µV/°C, guaranteed over the full milita

文件：249.78 Kbytes 页数：9 Pages

Maxwell

Low Voltage Micropower Quad Operational Amplifier

DESCRIPTION: Maxwell Technologies’ OP490 micropower quad operational amplifier microcircuit features Maxwell’s radiation-hardened RAD-PAK® packaging technology, the OP490 has an extremely low input offset voltage no less than 0.5 mV with a drift of under 5 µV/°C, guaranteed over the full milita

文件：249.78 Kbytes 页数：9 Pages

Maxwell

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

FEATURES Single-supply operation: 2.7 V to 12 V Wide input voltage range Rail-to-rail output swing Low supply current: 300 μA/amp Wide bandwidth: 3 MHz Slew rate: 0.5 V/μs Low offset voltage: 700 μV No phase reversal APPLICATIONS Industrial process control Battery-powered instrumentatio

文件：561.75 Kbytes 页数：24 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

文件：479.59 Kbytes 页数：20 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

文件：479.59 Kbytes 页数：20 Pages

AD

亚德诺

Micropower Single-Supply Rail-to-Rail Input/Output Op Amps

GENERAL DESCRIPTION The OP191, OP291, and OP491 are single, dual, and quad micropower, single-supply, 3 MHz bandwidth amplifiers featuring rail-to-rail inputs and outputs. All are guaranteed to operate from a +3 V single supply as well as ±5 V dual supplies. FEATURES Single-supply oper

文件：479.59 Kbytes 页数：20 Pages

AD

亚德诺