NX3L4357GM数据手册恩XP中文资料规格书

描述 Description

The NX3L4357 is a low-ohmic single-pole triple-throw analog switch suitable for use as ananalog or digital 3:1 multiplexer/demultiplexer. It has two digital select inputs (S0 and S1),one digital enable input (E), three independent inputs/outputs (Y0, Y1 and Y2) and acommon input/output (Z). The device features a broadcast mode, when S0 and S1 areboth high the signal applied to pin Z is passed to Y0, Y1 and Y2.
Schmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise andfall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levelsin 3.3 V applications without significant increase in supply current ICC. This makes itpossible for the NX3L4357 to switch 4.3 V signals with a 1.8 V digital controller,eliminating the need for logic level translation. The NX3L4357 allows signals withamplitude up to VCC to be transmitted from Z to Yn or Yn to Z. Its low ON resistance (0.5Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.

特性 Features

• Wide supply voltage range from 1.4 V to 4.3 V
• Very low ON resistance (peak):
• 1.65 Ω (typical) at VCC = 1.4 V
• 0.95 Ω (typical) at VCC = 1.65 V
• 0.55 Ω (typical) at VCC = 2.3 V
• 0.50 Ω (typical) at VCC = 2.7 V
• 0.50 Ω (typical) at VCC = 4.3 V
• Break-before-make switching
• High noise immunity
• ESD protection:
• HBM JESD22-A114F Class 3A exceeds 7500 V
• MM JESD22-A115-A exceeds 200 V
• CDM AEC-Q100-011 revision B exceeds 1000 V
• IEC61000-4-2 contact discharge exceeds 6000 V for switch ports
• CMOS low-power consumption
• Latch-up performance exceeds 100 mA per JESD 78B Class II Level A
• 1.8 V control logic at VCC = 3.6 V
• Control input accepts voltages above supply voltage
• Very low supply current, even when input is below VCC
• High current handling capability (350 mA continuous current under 3.3 V supply)
• Specified from –40 ℃ to +85 ℃ and from –40 ℃ to +125 ℃

应用 Application

• Cell phone
• PDA
• Portable media player