NX3L2T66GM数据手册恩XP中文资料规格书

描述 Description

The NX3L2T66 is a dual low-ohmic single-pole single-throw analog switch. Each switchhas two input/output terminals (nY and nZ) and an active HIGH enable input (nE). Whenpin nE is LOW, the analog switch is turned off.
Schmitt trigger action at the enable input (nE) makes the circuit tolerant to slower inputrise and fall times. A low input voltage threshold allows pin nE to be driven by lower levellogic signals without a significant increase in supply current ICC. This makes it possible forthe NX3L2T66 to switch 4.3 V signals with a 1.8 V digital controller, eliminating the needfor logic level translation.
The NX3L2T66 allows signals with amplitude up to VCC to be transmitted from nY to nZ; orfrom nZ to nY. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimalattenuation and distortion of transmitted signals.

特性 Features

Wide supply voltage range from 1.4 V to 4.3 V
Very low ON resistance (peak): 1.6 Ω (typical) at VCC = 1.4 V
1.0 Ω (typical) at VCC = 1.65 V
0.55 Ω (typical) at VCC = 2.3 V
0.50 Ω (typical) at VCC = 2.7 V
0.50 Ω (typical) at VCC = 4.3 V
High noise immunity
ESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V
MM JESD22-A115-A exceeds 200 V
CDM AEC-Q100-011 revision B exceeds 1000 V
IEC61000-4-2 contact discharge exceeds 4000 V for switch ports
CMOS low-power consumption
Latch-up performance exceeds 100 mA per JESD 78 Class II Level A
1.8 V control logic at VCC = 3.6 V
Control input accepts voltages above supply voltage
Very low supply current, even when input is below VCC
High current handling capability (350 mA continuous current under 3.3 V supply)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C

应用 Application

Cell phone
PDA
Portable media player