Single low-ohmic 8-channel analog switch

文件：266.82 Kbytes 页数：23 Pages

PHI

PHI

Single low-ohmic 8-channel analog switch

文件：245.97 Kbytes 页数：23 Pages

恩XP

Single low-ohmic 8-channel analog switch

文件：266.82 Kbytes 页数：23 Pages

PHI

PHI

Single low-ohmic 8-channel analog switch

文件：266.82 Kbytes 页数：23 Pages

PHI

PHI

Single low-ohmic 8-channel analog switch

文件：245.97 Kbytes 页数：23 Pages

恩XP

Single low-ohmic 8-channel analog switch

文件：245.97 Kbytes 页数：23 Pages

恩XP

恩XP Logic ??Q100 logic portfolio

文件：1.88964 Mbytes 页数：2 Pages

恩XP

Single low-ohmic 8-channel analog switch

The NX3L4051 is a low-ohmic 8-channel analog switch, suitable for use as an analog ordigital multiplexer/demultiplexer. The NX3L4051 has three digital select inputs (S1 to S3),eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). All eightswitches share an enable input (E). A HI Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.7 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.6 Ω (typical) at VCC = 2.3 V\n0.5 Ω (typical) at VCC = 2.7 V\n0.5 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protect;

恩XP

Single low-ohmic 8-channel analog switch

The NX3L4051 is a low-ohmic 8-channel analog switch, suitable for use as an analog ordigital multiplexer/demultiplexer. The NX3L4051 has three digital select inputs (S1 to S3),eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). All eightswitches share an enable input (E). A HI Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.7 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.6 Ω (typical) at VCC = 2.3 V\n0.5 Ω (typical) at VCC = 2.7 V\n0.5 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protect;

恩XP

Single low-ohmic 8-channel analog switch

The NX3L4051 is a low-ohmic 8-channel analog switch, suitable for use as an analog ordigital multiplexer/demultiplexer. The NX3L4051 has three digital select inputs (S1 to S3),eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). All eightswitches share an enable input (E). A HI Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.7 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.6 Ω (typical) at VCC = 2.3 V\n0.5 Ω (typical) at VCC = 2.7 V\n0.5 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protect;

恩XP