NX3L4051PW-Q100

Single low-ohmic 8-channel analog switch; Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.7 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.6 Ω (typical) at VCC = 2.3 V\n0.5 Ω (typical) at VCC = 2.7 V\n0.5 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V\nMM JESD22-A115-A exceeds 200 V\nCDM AEC-Q100-011 revision B exceeds 1000 V\nIEC61000-4-2 contact discharge exceeds 8000 V for switch ports\nCMOS low-power consumption\nLatch-up performance exceeds 100 mA per JESD 78B Class II Level A\n1.8 V control logic at VCC = 3.6 V\nControl input accepts voltages above supply voltage\nVery low supply current, even when input is below VCC\nHigh current handling capability (350 mA continuous current under 3.3 V supply)\nSpecified from –40 ℃ to +85 ℃ and from –40 ℃ to +125 ℃\n;

The NX3L4051 is a low-ohmic 8-channel analog switch, suitable for use as an analog ordigital multiplexer/demultiplexer. The NX3L4051 has three digital select inputs (S1 to S3),eight independent inputs/outputs (Y0 to Y7) and a common input/output (Z). All eightswitches share an enable input (E). A HIGH on E causes all switches into the highimpedance OFF-state, independent of Sn.\nSchmitt trigger action at the digital inputs makes the circuit tolerant to slower input rise andfall times. Low threshold digital inputs allows this device to be driven by 1.8 V logic levelsin 3.3 V applications without significant increase in supply current ICC. This makes itpossible for the NX3L4051 to switch 4.3 V signals with a 1.8 V digital controller,eliminating the need for logic level translation.The NX3L4051 allows signals withamplitude up to VCC to be transmitted from Z to Yn or from Yn to Z. Its low ON resistance(0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmittedsignals.\n