NX3L1G66GW-Q100

Low-ohmic single-pole single-throw analog switch; Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.6 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nHigh noise immunity\nESD protection: HBM JESD22-A114E Class 3A exceeds 7500 V\nMM JESD22-A115-A exceeds 200 V\nCDM AEC-Q100-011 revision B exceeds 1000 V\nCMOS low-power consumption\nLatch-up performance exceeds 100 mA per JESD 78 Class II Level A\nDirect interface with TTL levels at 3.0 V\nControl input accepts voltages above supply voltage\nHigh current handling capability (350 mA continuous current under 3.3 V supply)\nSpecified from -40 Cel to +85 Cel and from -40 Cel to +125 Cel\n;

The NX3L1G66 provides one single pole single-throw analog switch function. It has two input/output terminals (Yand Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.\nSchmitt trigger action at the enable input (E) makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 1.4 V to 4.3 V.\nThe NX3L1G66 allows signals with amplitude up to VCC to be transmitted from Y to Z; or from Z to Y. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensures minimal attenuation and distortion of transmitted signals.\n

NX3L1G66

Low-voltageanalogswitch

NX3L1G66GM

Low-voltageanalogswitch