Low-ohmic single-pole single-throw analog switch

The NX3L1G66 provides one single pole single-throw analog switch function. It has two input/output terminals (Yand Z) and an active HIGH enable input pin (E). When E is LOW, the analog switch is turned off.\nSchmitt trigger action at the enable input (E) makes the circuit tolerant to slower input ri Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance (peak): 1.6 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nHigh noise immunity\nESD protection: HBM JESD22-A114E Clas;

恩XP

恩智浦

NXPSEMI

恩XP

上传：深圳市三芯电子有限公司

NDK
2-SMD

NDK

金属工业

上传：深圳市纳艾斯科技有限公司

NXP
XQFN10

恩XP

上传：深圳市森海汇恒科技有限公司

NEXPERIA
con

NEXPERIANexperia B.V. All rights reserved

安世安世半导体(中国)有限公司

上传：北京天阳诚业科贸有限公司