Low-ohmic, single-pole, double-throw switch

文件：119.22 Kbytes 页数：18 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

文件：226.55 Kbytes 页数：22 Pages

恩XP

丝印：MJ；Package：SC-88；Low-ohmic single-pole double-throw analog switch

General description The NX3L1G3157-Q100 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt trigger act

文件：184.62 Kbytes 页数：21 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

General description The NX3L1G3157-Q100 is a low-ohmic single-pole double-throw analog switch suitable for use as an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), two independent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt trigger act

文件：184.62 Kbytes 页数：21 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

文件：226.55 Kbytes 页数：22 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

文件：257.85 Kbytes 页数：22 Pages

PHI

飞利浦

Low-ohmic single-pole double-throw analog switch

文件：226.55 Kbytes 页数：22 Pages

恩XP

Low-ohmic, single-pole, double-throw switch

文件：119.22 Kbytes 页数：18 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

文件：226.55 Kbytes 页数：22 Pages

恩XP

Low-ohmic single-pole double-throw analog switch

The NX3L1G3157 is a low-ohmic single-pole double-throw analog switch suitable for useas an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), twoindependent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt triggeraction at the digital input makes the Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance: 1.6 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protection:;

恩XP

恩智浦