NX3L1G3157GW

Low-ohmic single-pole double-throw analog switch; Wide supply voltage range from 1.4 V to 4.3 V\nVery low ON resistance: 1.6 Ω (typical) at VCC = 1.4 V\n1.0 Ω (typical) at VCC = 1.65 V\n0.55 Ω (typical) at VCC = 2.3 V\n0.50 Ω (typical) at VCC = 2.7 V\n0.50 Ω (typical) at VCC = 4.3 V\nBreak-before-make switching\nHigh noise immunity\nESD protection: HBM JESD22-A114F Class 3A exceeds 7500 V\nMM JESD22-A115-A exceeds 200 V\nCDM AEC-Q100-011 revision B exceeds 1000 V\nIEC61000-4-2 contact discharge exceeds 8000 V for switch ports\nCMOS low-power consumption\nLatch-up performance exceeds 100 mA per JESD78 Class II Level A\nDirect interface with TTL levels at 3.0 V\nControl input accepts voltages above supply voltage\nHigh current handling capability (350 mA continuous current under 3.3 V supply)\nSpecified from -40 °C to +85 °C and from -40 °C to +125 °C\n;

The NX3L1G3157 is a low-ohmic single-pole double-throw analog switch suitable for useas an analog or digital 2:1 multiplexer/demultiplexer. It has a digital select input (S), twoindependent inputs/outputs (Y0 and Y1) and a common input/output (Z). Schmitt triggeraction at the digital input makes the circuit tolerant to slower input rise and fall times.\nThe NX3L1G3157 allows signals with amplitude up to VCC to be transmitted from Z to Y0or Y1; or from Y0 or Y1 to Z. Its low ON resistance (0.5 Ω) and flatness (0.13 Ω) ensuresminimal attenuation and distortion of transmitted signals.\n