丝印：NWK；Package：VSSOP；SNx5HVD308xE Low-Power RS-485 Transceivers

1 Features • Meets or exceeds the requirements of the TIA/ EIA-485A standard • Low quiescent power – 0.3-mA Active mode – 1-nA Shutdown mode • 1/8 Unit load up to 256 nodes on a bus • Bus-pin ESD protection up to 15 kV • Industry-standard SN75176 footprint • Fail-safe receiver (bus open,

文件：1.36556 Mbytes 页数：39 Pages

TI

德州仪器

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：159.61 Kbytes 页数：9 Pages

ZARLINK

Zarlink Semiconductor Inc

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：122.37 Kbytes 页数：9 Pages

Mitel

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：122.37 Kbytes 页数：9 Pages

Mitel

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：159.61 Kbytes 页数：9 Pages

ZARLINK

Zarlink Semiconductor Inc

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：159.61 Kbytes 页数：9 Pages

ZARLINK

Zarlink Semiconductor Inc

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：159.61 Kbytes 页数：9 Pages

ZARLINK

Zarlink Semiconductor Inc

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：122.37 Kbytes 页数：9 Pages

Mitel

PHY/PMD High Speed Copper Media Transceiver

The NWK914D is a Physical Layer device designed for use in 100BASE-TX applications. The NWK914D has integrated the 100mb/s transceiver, clock and data recovery and NRZI conversion circuitry. It is designed for use in cost effective NIC adapter cards and 100BASE-TX repeater and switch applications.

文件：159.61 Kbytes 页数：9 Pages

ZARLINK

Zarlink Semiconductor Inc

3.3V 10/100 Fast Ethernet Transceiver to MII

Description The NWK933 is a single chip 3.3V CMOS physical layer solution from MII to the magnetics. It is designed for 10BASE-T and 100BASE-TX Ethernet, based on the IEEE 802.3 specifications. Features ● Integrated 10/100 Mbps Ethernet in a Single Chip Solution ● Single 3.3V Power Supply ● H

文件：141.3 Kbytes 页数：18 Pages

Mitel