Integrated Circuit Bridge Driver for DC Motor Control

Description: The NTE7064 is an integrated circuit in a 7−Lead SIP type package designed for use as a bridge driver for brushed DC motor rotation control. Forward rotation, reverse rotation, stop, and braking operations are available. Typical applications include a loading and reel motor driver

文件：75.22 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio IF Detector for High Quality Multi-Channel TV & VCR

Description: The NTE7067 is a 4.5MHz to 6.5MHz intercarrier audio IF detector for high–quality multi–channel TV and VCR sound systems. It is designed for use is quasi–parallel configurations to eliminate audio buzz and minimize other side–effects present in conventional detection circuits. This

文件：19.56 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 13W/Ch

Features: High Power: POUT = 13W/Ch (Typ) Low Noise: VNO = 0.14mVrms (Typ) Operating Supply Voltage Range: VCC = 10V to 37V Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

文件：20.07 Kbytes 页数：2 Pages

NTE

Integrated Circuit 2 Modulus High Speed Divider w/ECL Output for Phase-Lock Loop (PLL) Synthesized TV Tuner

Description: The NTE7069 is an integrated circuit consisting of a 1/128, 1/136 prescaler, high speed frequency divider using an ECL (emitter–coupled logic) circuit configuration in an 8–Lead SIP type package. When the clocks are applied to the pulse swallow control input terminal, M, the dividi

文件：21.33 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 6W/Ch

Features: • High Power: POUT = 6W/Ch (Typ) • Low Noise: VNO = 0.14mVrms (Typ) • Operating Supply Voltage Range: VCC = 10V to 30V

文件：20.02 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual, Full−Bridge Driver

Description: The NTE7071 is a high voltage, high current, dual, full−bridge driver in a 15−Lead Staggered SIP type package designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC, and stepping motors. Two enable inputs are provided to enable or disab

文件：86.96 Kbytes 页数：4 Pages

NTE

Integrated Circuit Dual DC Controlled Potentiometer Circuit

Description: The NTE7072 is a monolithic integrated circuit designed for use as a volume and tone control circuit in stereo amplifiers. This dual tandem potentiometer IC consists of two ganged pairs of electronic potentiometers with eight inputs connected via impedance converters, and the four

文件：22.73 Kbytes 页数：3 Pages

NTE

Integrated Circuit Hybrid Switching Regulator

Integrated Circuit Hybrid Switching Regulator

文件：19.24 Kbytes 页数：2 Pages

NTE

Integrated Circuit Module - 100W Offline Switching Regulator for Color TV

Features: • The Oscillation Circuit is Self–Oscillating • Functional Trimming Permits the Output Voltage to be Set with High Accuracy: ±1V • No Feedback from the Secondary Side to the Primary Side • Few External Components Required

文件：24.95 Kbytes 页数：2 Pages

NTE

Integrated Circuit Module - 100W Offline Switching Regulator

Features: • Easy to Constitute Multi–Output • Built–In Overcurrent Protector • Remote ON/OFF Control Pin Connectable Functions: • Pulse Width Modulator • Oscillator • Control • Error Amp

文件：22.99 Kbytes 页数：2 Pages

NTE