Integrated Circuit Single Chip TV Processor

Features: VIF • PLL Type Video Detector for the High Picture & Sound Quality • High Gain VIF Amp (Pre–Amp Unnecessary) • High Speed AGC • Built–In APC Time Constant Switch SIF • Audio IN/OUT at Same Time • Video/Audio Simultaneous Muting, or Audio–Only Muting Possible

文件：38.71 Kbytes 页数：5 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier, 2W

Description: The NTE7055 is a dual audio power amplifier in a 14−Lead DIP type package designed for portable audio sets. Features:  Wide Operating Voltage Range: VCC= 3V to 16V  High Output Power: PO= 2W at VCC= 12V, RL= 8Ω, THD = 10 PO= 1.6W at VCC= 9V, RL= 4Ω, THD = 10

文件：76.38 Kbytes 页数：3 Pages

NTE

Integrated Circuit Vertical Deflection Output Circuit for Color TV

Description: The NTE7056 is an integrated circuit in a 9−Lead SIP type package designed for use as a vertical deflection output circuit for 9” to 21” color television sets. This device requires no voltage−boosted pulses and can therefore be connected to a chrominance−video deflection IC such as

文件：72.21 Kbytes 页数：3 Pages

NTE

Integrated Circuit TV SIF/AFT/RF AGC

Description: The NTE7057 is an integrated circuit in a 12−Lead SIP type package designed for providing a high performance SIF for a TV. This device adopts a quasi−parallel inter−carrier detection system for good sound reproduction. Features: 3−Stage Inter−Carrier Amplifier and Inter−Car

文件：76.98 Kbytes 页数：3 Pages

NTE

Integrated Circuit Single Chip TV NTSC System

Description: The NTE7058 combines all the functions required for an NTSC color TV system in a 64–Lead DIP type plastic package. This device is designed to offer a wide capability of applications from fundamental CTV to high–end MPX CTV with a quasi–parallel SIF system, requiring minimal externa

文件：26.67 Kbytes 页数：4 Pages

NTE

Integrated Circuit Dual BTL 14W Audio Power Amplifier

Description: The NTE7059 is an integrated circuit in a 16−Lead Staggered SIP type package designed for a 14W (13.2V, 4Ω) output power amplifier. Stereo operation is enabled due to incorporating two BTL amplifiers. High reliability is obtained due to incorporating protectors. ON/OFF is enabled e

文件：74.1 Kbytes 页数：3 Pages

NTE

Integrated Circuit NTSC Single Chip Color TV Signal Processor

Description: The NTE7060 is an integrated circuit in a 52–Lead DIP type package that combines all of the signal (VIF, SIF, Video, Color and Synchronous Signal) processing circuits in NTSC color TV onto one chip. Features: • VIF Circuit using PLL Complete Synchronous Detection • Audio

文件：26.41 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual 5.3W Audio Power Amplifier Circuit

Description: The NTE7061 is a dual 5.3W (12V, 3Ω) power amplifier in a 12–Lead SIP type package. Dual amplifier circuits make stereo operation possible using one chip. Low quiescent current makes the NTE7061 ideal for use in battery operated applications such as radio cassette recorders. F

文件：23.01 Kbytes 页数：2 Pages

NTE

Integrated Circuit CRT Display Synchronization Deflection Circuit

Description: The NTE7062 is a sync deflection circuit in a 20–Lead DIP type package. When used in combination with the NTE1773 or the NTE1797 (for vertical output use) this device forms a sync–deflection circuit that meets every requirement for CRT display use. So far, ICs for color TV use h

文件：23.85 Kbytes 页数：3 Pages

NTE

Integrated Circuit CRT Display Synchronization Deflection Circuit

Description: The NTE7063 is a sync–deflection circuit IC dedicated to CRT display use. It can be connected to the NTE1773, NTE1797, or the NTE1855 (for vertical output use) to form a sync–deflection circuit that meets every requirement for CRT use. So far, ICs for color TV use have been appl

文件：25.63 Kbytes 页数：3 Pages

NTE