Integrted Circuit Voltage Regulator

Description: The NTE309K is a complete 5V regulator fabricated on a single silicon chip. It is designed for local regulation on digital logic cards, eliminating the distribution problems associated with single–point regulation. With the TO3 power package, the available output current is g

文件：24.33 Kbytes 页数：2 Pages

NTE

Optoisolator Schmitt Trigger Output

Description: The NTE3090 is an optoisolator in a 6–Lead DIP type package and contains a gallium arsenide IRED optically coupled to a high–speed integrated detector with a Schmitt Trigger output. This device is designed for applications requiring electrical isolation, fast response time, noise i

文件：22.91 Kbytes 页数：2 Pages

NTE

Optoisolator SCR Output

Description: The NTE3091 is a gallium arsenide, infrared emitting diode coupled with a light activated silicon controlled rectifier in a 6–Lead DIP type ppackage.

文件：20.63 Kbytes 页数：2 Pages

NTE

Optoisolator Open Collector, NPN Transistor Output

Features: High Isolation Voltage High Speed: tPHL= 0.2µs, tPLH= 1.0µs (Typ) Current Transfer Ratio: 19 Min Applications: Digital Logic Isolation Line Receiver Feedback Control Power Supply Control Switching Power Supply Transistor Invertor

文件：25.27 Kbytes 页数：3 Pages

NTE

Optoisolator NPN Split Darlington Output

Description: The NTE3093 coupler uses a light emitting diode (LED) and an integrated high gain photon detector to provide 3000V DC electrical insulation, 500V/µs common mode transient immunity and extremely high current transfer ratio between inut and output. Separate pins for the photodiode and

文件：29.75 Kbytes 页数：3 Pages

NTE

Optoisolator Dual, High Speed, Open Collector NAND Gate

Description: The NTE3094 consists of a pair of inverting optically coupled gates each with a GaAsP emitting diode and a unique integrated detector. The photons are collected in the detector by a photodiode and then amplified by a high gain linear amplifier that drives a Schottky clamped open coll

文件：29.92 Kbytes 页数：3 Pages

NTE

Optoisolator

Description: The NTE3095 is a dual photocoupler optoisolator in an 8–Lead DIP type package consisting of a pair of Gallium Aluminum Arsenide light emitting diodes and integrated photodetectors. Separate connections for the photodiode bias and output transistor collectors improve the speed up to

文件：27.11 Kbytes 页数：4 Pages

NTE

Optoisolator Low LED Drive NPN Transistor Output

Description: The NTE3096 is a gallium arsenide, infrared emitting diode optically coupled to a silicon phototransistor in a 6–Lead DIP type package. This device is designed for applications requiring low LED drive current, high electrical isolation, small package size and low cost such as inter

文件：22.62 Kbytes 页数：2 Pages

NTE

Optoisolator Zero Crossing TRIAC Driver

Description: The NTE3097 is an optoisolator in a 6–Lead DIP type package and contains a gallium arsenide IRED optically coupled to a monolithic silicon detector performing the function of a Zero Voltage Crossing bilateral TRIAC Driver. This device is designed for use with a TRIAC in the i

文件：22.06 Kbytes 页数：2 Pages

NTE

Optoisolator Phototransistor w/NPN Transistor Output

Description: The NTE3098 consists of a phototransistor optically coupled to a gallium arsenide infrared emitting diode in a single 4–Lead DIP type package. Features: Collector–Emitter Voltage: VCEO= 55V Min Current Transfer Ratio: IC/IF= 100 Min Isolation Voltage: BVS= 5000Vr

文件：23.42 Kbytes 页数：3 Pages

NTE