Integrated Circuit Dual Power Operational Amplifie

Description: The NTE1854D/NTE1854M is a monolithic dual–power operational amplifier which features a high current, low saturation voltage, flyback protected output stage optimized for driving heavy inductive loads. Capable of operation in a single supply mode form as low as 4.5V up to 13.2V, th

文件：27.21 Kbytes 页数：3 Pages

NTE

Integrated Circuit Dual Power Operational Amplifie

Description: The NTE1854D/NTE1854M is a monolithic dual–power operational amplifier which features a high current, low saturation voltage, flyback protected output stage optimized for driving heavy inductive loads. Capable of operation in a single supply mode form as low as 4.5V up to 13.2V, th

文件：27.21 Kbytes 页数：3 Pages

NTE

Integrated Circuit Vertical Deflection Output Circuit w/Driver Circuit for TV Monitor

Description: The NTE1855 is an integrated circuit in a 13–Lead SIP type package that contains the vertical deflection output circuit with a driver for small–aperture (maximum deflection current 1.8Ap–p) color/B & W TV, monitor/display use. This device has such features as greatly reduced nu

文件：23.57 Kbytes 页数：3 Pages

NTE

Integrated Circuit Color TV Video/Chroma/Deflection Circuit

Description: The NTE1839 and NTE1856 are small–sized multifunctional integrated circuits containing the “video, chroma, deflection” circuit of NTSC color TVs in a 30–Lead DIP type package. Besides being small–sized, they have such features as fewer external components and fewer adjustments. requi

文件：27.55 Kbytes 页数：3 Pages

NTE

Integrated Circuit Stepper Motor Driver

Description: The NTE1857 is designed to drive a two–phase stepper motor in the bipolar mode, The circuit of four input sections, a logic decoding/sequencing section, two driver–stages for the motor coils, and an output to indicate the Phase A drive state. Features: • Single Supply Opera

文件：56.87 Kbytes 页数：6 Pages

NTE

Integrated Circuit Vertical Deflection Circuit

Description: The NTE1858 is a full performance and very efficient vertical deflection circuit in an 11–Lead SIP type package intended for direct drive of a TV picture tube in Color and B & W television as well as in Monitor and Data Displays. Features: • Ramp Generator • Independ

文件：26.66 Kbytes 页数：4 Pages

NTE

Integrated Circuit dbx TV Noise Reduction Integrated Circuit

Description: The NTE1859 is an integrated circuit designed for the dbx–TV noise reduction decode circuit for multi channel TV sound systems. This device contains a voltage controlled amplifier, a variable de–emphasis circuit with new configuration and RMS detectors with completely integrated ac

文件：28.36 Kbytes 页数：3 Pages

NTE

Silicon Complementary Transistors General Purpose Output & Driver for Audio Amplifier

Description: The NTE186 (NPN) and NTE187 (PNP) are silicon complementary transistors in a TO202 type case designed for use as output and driver stages of amplifiers operating at frequencies from DC to greater than 1MHz, series, shunt, and switching regulators, low and high frequency inverters/c

文件：20.75 Kbytes 页数：2 Pages

NTE

Integrated Circuit TV Stereo Multiplexing Decoder

Description: The NTE1860 is a bipolar IC for use in TV stereo multiplexing decoding, filters for stereo, and SAP (Separate Audio Program) demodulation applications. Features: • Low number of external parts • Excellent channel separation characteristics for stereo applications. Min. 4

文件：110.09 Kbytes 页数：5 Pages

NTE

Integrated Circuit TV Vertrical Deflection Circuit

Description: The NTE347 is designed for 13.6 volt, VHF large signal power amplifier applications required in military and industrial equipment operating to 240MHz. Features: Low lead inductance stripline package for easier design and increased broadband capability. Balanced Emitter C

文件：74.79 Kbytes 页数：2 Pages

NTE