Integrated Circuit Dual Balanced Modulator for Video Cameras

Description: The NTE1709 is an integrated circuit in a 9–Lead SIP type package that incorporates two balanced modulators Features: • Dual Balanced Modulator • No External Bias Circuit Required • Carrier Suppression: 40dB Typ

文件：18.29 Kbytes 页数：2 Pages

NTE

Silicon NPN Transistor Audio/Video Amplifier

Description: The NTE171 is a silicon NPN transistor in a TO202 type case designed for high–voltage TV video and chroma output circuits, high–voltage linear amplifiers, and high–voltage transistor regulators. Features: • High Collector–Emitter Breakdown Voltage Voltage: V(BR)CER = 300V @

文件：21.86 Kbytes 页数：2 Pages

NTE

Integrated Circuit Record/Playback Circuit for VCR

Description: The NTE1710 is an integrated circuit in a 22–Lead DIP type package designed for tape recorder and VCR audio recording and playback. This device has built–in electronic switches for recording and playback which include the ones for a noise reduction circuit. Features: • Elec

文件：24.15 Kbytes 页数：3 Pages

NTE

Integrated Circuit 2 Head Recording Amp for VCR

Description: The NTE1711 is an integrated circuit in a 9–Lead SIP type package designed for use as a recording amplifier in VCRs. Features: • Video Head can be a Driver • Supply Voltage of Either 9V or 12V Functions: • Mixer Circuit • Recording Current Amplifier

文件：18.44 Kbytes 页数：2 Pages

NTE

Integrated Circuit Record Video Signal Processor for VCR

Description: The NTE1712 is an integrated circuit in a 22–Lead DIP type package designed for use in VCR recording video signal processing. Features: • Video AGC Circuit • Pre–Emphasis Circuit • Dynamic–Emphasis Circuit • White/Dark Chip • FM Modulator • Supply Voltage: 5V

文件：21.62 Kbytes 页数：2 Pages

NTE

Integrated Circuit Line Noise Canceller for VCR

Description: The NTE1713 is an integrated circuit in an 18–Lead DIP type package designed for use as a line noise canceller in VCRs. Features: • The Functions Consist of: FM Demodulator Differential Amplifier • Supply Voltage: 5V

文件：20.24 Kbytes 页数：2 Pages

NTE

Integrated Circuit Remote Control Amplifier/Detector

Description: The NTE1714M is and integrated circuit in an 8–Lead DIP type package designed for use in infrared remote control applications. It provides the high gain and pulse shaping needed to couple the signal from an IR receiver diode to the tuning control system logic. Features: • H

文件：19.54 Kbytes 页数：2 Pages

NTE

Integrated Circuit Remote Control Amplifier/Detector

Description: The NTE1714S is and integrated circuit in an 8–Lead SIP type package designed for use in infrared remote control applications. It provides the high gain and pulse shaping needed to couple the signal from an IR receiver diode to the tuning control system logic. Features: • W

文件：19.14 Kbytes 页数：2 Pages

NTE

Integrated Circuit 8-Circuit Display Driver

Description: The NTE1715 is an integrated circuit in an 18–Lead DIP type package designed for high–breakown fluorescent display tube drive. Features: • Built–In 8 Circuits • Output Incorporating Pull–Down Resistor for Direct Fluorescent Display Tube Drive • Direct Input for CMOS o

文件：18.84 Kbytes 页数：2 Pages

NTE

Integrated Circuit Reversible Motor Driver for VCR

Features: • Supply Voltage Range: 6V to 18V • Power Dissipation: 2200mW • Output Motor Driving Current up to 1600mA • Two Control Logic Inputs Allow Switching of Three Output States: Forward Reverse Braking • Low Standby Current • Adjustable Output Voltage Enabl

文件：22.66 Kbytes 页数：3 Pages

NTE