Integrated Circuit Phase Lock Loop (PLL) Stereo Decoder

Features: ● Requires No Inductors ● Low External Part Count ● Only Oscillator Frequency Adjustment Necessary ● Integral Stereo/Monaural Switch 75mA Lamp Driving Capability ● Wide Dynamic Range: Typically up to 1.3V(RMS) Composite Input Signal ● Wide Supply Voltage: 8V to 16V ● Excellent Cha

文件：23.98 Kbytes 页数：2 Pages

NTE

Integrated Circuit CMOS, Phase Comparator

Description: The NTE1208 is an integrated circuit in a 9–Lead SIP type package consisting of a digital phase comparator and an amplifier. Three state output connected to low pass filter (using an internal amplifier) will produce DC voltage to control a VCO. Low state pulses appear on phase out a

文件：19.57 Kbytes 页数：2 Pages

NTE

Isolated 1W Single Output SM DC-DC Converters

RoHS compliant Lead frame technology Single isolated output 1kVDC isolation Efficiency up to 78 Power density 1.8W/cm3 Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.37cm2 3.3V, 5V & 12V inputs 3.3V, 5V, 9V, 12V & 15V outp

文件：237 Kbytes 页数：8 Pages

MuRata

村田

Germanium PNP Transistor Audio Frequency Power Amplifier

Description: The NTE121 is a Germanium PNP Alloy Junction transistor in a TO3 type package designed as an audio frequency power output amplifier.

文件：20.61 Kbytes 页数：2 Pages

NTE

Integrated Circuit Preamp w/ALC

Description: The NTE1210 is a low–noise, high–gain preamplifier with a built–in ALC (automatic level control) circuit in a 9–Lead SIP type package designed for use as a record/playback preamp in cassette tape recorders. Features: • Wide ALC Range • Wide Range of Working Power Supply

文件：20.44 Kbytes 页数：2 Pages

NTE

Isolated 1W Single Output SM DC-DC Converters

RoHS compliant Lead frame technology Single isolated output 1kVDC isolation Efficiency up to 78 Power density 1.8W/cm3 Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.37cm2 3.3V, 5V & 12V inputs 3.3V, 5V, 9V, 12V & 15V outp

文件：237 Kbytes 页数：8 Pages

MuRata

村田

Integrated Circuit TV Video IF Amp

Functions: • 1st Video IF Amplifier • 2nd Video IF Amplifier • Forward AGC Amplifier • Reverse AGC Amplifier

文件：21.73 Kbytes 页数：2 Pages

NTE

Integrated Circuit AM Tuner System

Description: The NTE1214 is a high integrated circuit in a 16–Lead DIP type package designed for use in the AM system of high grade receivers. This device contains most of the functions needed for AM receiving. Features: • RF Amplifier Stage: Good quieting sensitivity by means of

文件：22.75 Kbytes 页数：3 Pages

NTE

Integrated Circuit Stereo Equalizer Amplifier

Features: Good Voltage and Thermal Regulation Small Shock Noise at Switching ON Low Distortion, High S/N Absolute Maximum Ratings: (TA = +25°C, unless otherwise specified) Supply Voltage, VCC . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . 15V

文件：79.98 Kbytes 页数：2 Pages

NTE

Isolated 1W Single Output SM DC-DC Converters

RoHS compliant Lead frame technology Single isolated output 1kVDC isolation Efficiency up to 78 Power density 1.8W/cm3 Wide temperature performance at full 1 Watt load, –40°C to 85°C UL 94V-0 Package material Footprint over pins 1.37cm2 3.3V, 5V & 12V inputs 3.3V, 5V, 9V, 12V & 15V outp

文件：237 Kbytes 页数：8 Pages

MuRata

村田