Integrated Circuit Low Noise, Equalizier Amp

Features: • High Open Loop Gain, Low Distortion • High S/N Because of High Gain at 1st Stage • Excellent Characteristics for Supply Voltage and Temperature

文件：70.21 Kbytes 页数：2 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit Phase Lock Loop (PLL) FM Stereo Demod

Description: The NTE1461 is a multiplex integrated circuit in a 16−Lead SIP type package designed for use in FM car stereo applications. Due to its low distortion factor, this device can be used as a multiplex stereo demodulator appropriate for car component stereo units. Features: • Lo

文件：74.81 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Preamp

Features: • Low Noise: VNI = 0.8μVrms (Typ.) • High Open Loop Voltage Gain: GVO = 92dB (Typ.) • Low Distortion: THD = 0.1 (Max.) at VOUT = 7Vrms, GV = 40dB, f = 1kHz

文件：67.54 Kbytes 页数：1 Pages

NTE

Integrated Circuit AF Power Amp for Tape Recorder

Features: • AF Output Power: 2.7W/3.2Ω, or 2.3W/4Ω • Small op Noise by Muting CRT • High Ripple Reduction • Good Supply Voltage Characteristics • No Switching Distortion at High Frequency

文件：72.13 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 500mW

Description: The NTE1465 is an integrated circuit in a 9–Lead SIP type packge designed for use as an audio power amplifier in radio and portable cassette tape recorders. Features: • Output Power: PO = 500mW (Typ) @ VCC = 6V, RL = 8Ω, THD = 10 • Wide Operating Supply Range: VCC = 4V t

文件：21.6 Kbytes 页数：2 Pages

NTE

Integrated Circuit Preamp w/ALC Transistors

Features: • Pre–Amplifier (Recording or Playback) with ALC Transistors for Tape Recorder • Low Noise: VNI = 1.3µVrms (Typ) • Wide ALC Range • Operates from a Wide Range of Power Supplies: VCCopr = 3V to 15V

文件：20.61 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio, Low Power Output Amplifier

Features: • Low Noise: VNI = 1µVrms • Wide Operating Supply Voltage Range: VCC = 3.5 to 25V • 150mW Audio Output Power at VCC = 20V, RL = 150Ω Applications: • Line Output Amplifier • Recording Head Driver and Headphone Driver of Tape Recorder Deck.

文件：21.16 Kbytes 页数：2 Pages

NTE

Integrated Circuit Video IF & AFT

Features: • SAW Filter Connectable Without Preamp • Input Sensitivity: Vin = 50μVrms Typ. • Output Peak−to−Peak Voltage at Video Detector Adjustable Externally. • High S/N under Weak−Input Signal Functions: • PIF Amplifier • Video Detector • AFS with Defeat • Noise Can

文件：81.08 Kbytes 页数：4 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE