Integrated Circuit Dual, Audio Power Amp, 5.3W/Ch

Features: • Built−in Protector Circuits (for surge and thermal, etc.) • Built−in Automatic Operating Point Stabilized Circuit • Low Distortion, Low L/F Noise • Small Transient Nosie at Power ON/OFF Switching • Good Channel Separation • Few External Components

文件：77.2 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Power Amplifier Circuit, 7.5W

Description: The NTE1373 is an integrated circuit designed for use as a 7.5W (16W, 4Ω) power amplifier output with low noise and low distortion suitable for TV sets with multi−sound. Stereo operation is possible due to incorporating two amplifiers on one 12−Lead SIP type chip. Features:

文件：84.89 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amplifier, 22W

Description: The NTE1376 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 22W output power (THD = 0.5) at VS = 32V/4Ω. This device provides high output current and has very low harmonic and cross–over disto

文件：24.16 Kbytes 页数：3 Pages

NTE

Integrated Circuit AF Power Amplifier, 6W/Channel

Features: • Built–In 2 Channels (Dual) Enabling use in Stereo and Bridge Amplifier Applications Dual: 6W x 2 Typ Bridge: 19W Typ • Minimum Number of External Parts Required • Low Pop Noise during Power Supply ON/OFF and Good Starting Balance • Good Ripple Rejection: 46dB Ty

文件：23.05 Kbytes 页数：2 Pages

NTE

Integrated Circuit Audio Power Amplifier, 10W

Description: The NTE1378 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 12W output power (THD = 10) at VS = ±12V/4Ω. This device provides high output current and has very low harmonic and cross–over disto

文件：24.45 Kbytes 页数：3 Pages

NTE

Zener Diode, 1 Watt 짹5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：30.78 Kbytes 页数：3 Pages

NTE

NTE5061A thru NTE5105A Zener Diode, 1 Watt 5 Tolerance

Features: • Zener Voltage 110V to 200V • Low Cost • Low Zener Impedance • Excellent Clamping • Easily Cleaned with Freon, Alcohol, Chlorothene, and Similar Solvents

文件：52.32 Kbytes 页数：4 Pages

NTE

Integrated Circuit Audio Power Amplifier, 14W

Description: The NTE1380 is a monolithic integrated circuit in a 5–Lead TO220 type package intended for use as an audio class AB amplifier. Typically, it provides 14W output power (THD = 0.5) at VS = ±14V/4Ω. This device provides high output current and has very low harmonic and cross–over dist

文件：25.01 Kbytes 页数：3 Pages

NTE

Integrated Circuit Audio Power Amp, 2.1W

Features: • High Power Output at Low Voltage: PO = 2.1W Typ (9V, 4Ω) • Low Quiescent Current

文件：81.8 Kbytes 页数：2 Pages

NTE

Integrated Circuit Dual Audio Power Amp, 5.1W/Ch (10.5W BTL)

Description: The NTE1383 is an integrated circuit in an 18–Lead DIP designed for use as an audio output with low noise, low distortion, and high output for a wide range of power supply voltages and load resistance. Two built–in amplifiers provide dual or BTL operation. Typical applications incl

文件：26.51 Kbytes 页数：3 Pages

NTE