Dual supply translating transceiver; auto direction sensing; 3-state

General description The NTB0102 is a 2-bit, dual supply translating transceiver with auto direction sensing, that enables bidirectional voltage level translation. It features two 2-bit input-output ports (An and Bn), one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A)

文件：367.07 Kbytes 页数：24 Pages

恩XP

TXS0102 2-Bit Bidirectional Voltage-Level Translator for Open-Drain and Push-Pull Applications

1 Features 1• No Direction-Control Signal Needed • Maximum Data Rates – 24 Mbps (Push Pull) – 2 Mbps (Open Drain) • Available in the Texas Instruments NanoStar™ Package • 1.65 V to 3.6 V on A Port and 2.3 V to 5.5 V on B Port (VCCA ≤ VCCB) • VCC Isolation Feature: If Either VCC Input Is a

文件：1.10474 Mbytes 页数：40 Pages

TI

德州仪器

TXU0102 Dual-Bit Fixed Direction Voltage-Level Translator with Schmitt-Trigger Inputs and 3-State Outputs

1 Features • Fully configurable dual-rail design allows each port to operate from 1.1 V to 5.5 V • Up to 200 Mbps support for 3.3 V to 5.0 V • Schmitt-trigger inputs allows for slow and noisy inputs • Inputs with integrated static pull-down resistors prevent channels from floating • High d

文件：1.66408 Mbytes 页数：41 Pages

TI

德州仪器

IEC Connector C15A, Rewireable, Straight

文件：326.31 Kbytes 页数：4 Pages

SCHURTER

硕特

LSF0102 2 Channel Auto-Bidirectional Multi-Voltage Level Translator for Open-Drain and Push-Pull Applications

1 Features • Provides bidirectional voltage translation with no direction pin • Supports up to 100MHz up translation and greater than 100MHz down translation at ≤ 30pF capacitive load and up To 40MHz up or down translation at 50pF capacitive load • Allows bidirectional voltage-level transla

文件：2.03985 Mbytes 页数：42 Pages

TI

德州仪器