晶圆级封装I2C接口数字温度传感器

NST103是一款采用4焊球晶圆级芯片规模封装(WCSP)的数字输出温度传感器。NST103读取温度的分辨率能够达到1℃。NST103具有一个与I2C和 SMBus接口均兼容的两线式接口。此外，该接口还支持多器件存取(MDA)命令，允许主控器与总线上的多个器件同时进行通信，从而不必向总线上的 每个NST103个别发送命令。最多可以把8个NST103并联连接起来，并由主机轻松地对其进行读取。对于那些具有多个必须加以监视的温度测量区域的空间受限、功耗敏感型应用而言，NST103是特别理想的选择。NST103的规定工作温度范围为-40℃至125℃。 •多器件存取 (MDA)\n•全局读/写操作\n•I2C/ SMBus兼容型接口\n•分辨率：8位\n•精度：\n - 典型值为 ±1℃(–10℃ to 100℃)\n - 全温区最大误差：±3℃\n•低静态电流: \n - 运行模式下电流为3μA@0.25Hz\n - 停机模式下静态电流为1.0μA\n•输入电压范围: 1.5V ~ 3.6V\n•数字输出;

Novosense

纳芯微

Trench MOS

•VDS=-100V, ID=-35A\n\n• RON=36mΩ(typ.) @VGS=-10V\n\n•RON=41mΩ(typ.) @VGS=-4.5V\n\n• VGS(th)=-1.5V (typ.)\n\n• Package:TO-263;

Norsem

诺芯

STM32 Nucleo-64 boards

Description The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™Uno V3 connectivity support and the

文件：406.58 Kbytes 页数：6 Pages

STMICROELECTRONICS

意法半导体

STM32 Nucleo-64 board

Description The STM32 Nucleo board provides an affordable and flexible way for users to try out new concepts and build prototypes with the STM32 microcontroller, choosing from the various combinations of performance, power consumption and features. The Arduino™Uno V3 connectivity support and the

文件：263.45 Kbytes 页数：5 Pages

STMICROELECTRONICS

意法半导体

STM32 Nucleo-64 boards

Features • Common features – STM32 microcontroller in LQFP64 package – 1 user LED shared with ARDUINO® – 1 user and 1 reset push-buttons – 32.768 kHz crystal oscillator – Board connectors: ◦ ARDUINO® Uno V3 expansion connector ◦ ST morpho extension pin headers for full access to all STM32

文件：1.23193 Mbytes 页数：7 Pages

STMICROELECTRONICS

意法半导体