NM27C010数据手册集成电路（IC）的存储器规格书PDF

描述 Description

General Description
The NM27C010 is a high performance, 1,048,576-bit Electrically Programmable UV Erasable Read Only Memory. It is organized as 128K-words of 8 bits each. Its pin-compatibility with byte-wide JEDEC EPROMs enables upgrades through 8 Mbit EPROMs. The ‘‘Don’t Care’’ feature during read operations allows memory expansions from 1M to 8M bits with no printed circuit board changes.
The NM27C010 can directly replace lower density 28-pin EPROMs by adding an A16 address line and VCC jumper. During the normal read operation PGM and VPP are in a ‘‘Don’t Care’’ state which allows higher order addresses, such as A17, A18, and A19 to be connected without affecting the normal read operation. This allows memory upgrades to 8M bits without hardware changes. The NM27C010 is also offered in a 32-pin plastic DIP with the same upgrade path.
The NM27C010 provides microprocessor-based systems extensive storage capacity for large portions of operating system and application software. Its 90 ns access time provides no-wait-state operation with high-performance CPUs. The NM27C010 offers a single chip solution for the code storage requirements of 100% firmware-based equipment. Frequently-used software routines are quickly executed from EPROM storage, greatly enhancing system utility.
The NM27C010 is manufactured using National’s advanced CMOS AMGTM EPROM technology.
The NM27C010 is one member of a high density EPROM Family which range in densities up to 4 Megabit.

特性 Features

■ High performance CMOS
   - 90 ns access time
■ Fast turn-off for microprocessor compatibility
■ Simplified upgrade path
   - VPP and PGM are ‘‘Don’t Care’’ during normal read operation
■ Manufacturers identification code
■ Fast programming
■ JEDEC standard pin configurations
   - 32-pin DIP package
   - 32-pin PLCC package
   - 32-pin TSOP package