24-BIT SERIAL TO PARALLEL CONVERTER?????????

GENERAL DESCRIPTION The NJU3719 is a 24-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as the connection between NJU3719 and MPU using only 4 lines. The serial data synchronizing with 5MHz or more clock can be i

文件：204.92 Kbytes 页数：6 Pages

NJRC

日本无线

24-bit serial to parallel converter

Nisshinbo

日清纺微电子

24-BIT SERIAL TO PARALLEL CONVERTER

GENERAL DESCRIPTION The NJU3719A is a 24-bit serial to parallel converter especially applying to MPU outport expander. It can operate from 2.4V to 5.5V. The effective outport assignment of MPU is available as the connection between NJU3719A and MPU using only 4 lines. The serial data synch

文件：62.28 Kbytes 页数：8 Pages

NJRC

日本无线

24-BIT SERIAL TO PARALLEL CONVERTER?????????

GENERAL DESCRIPTION The NJU3719 is a 24-bit serial to parallel converter especially applying to MPU outport expander. The effective outport assignment of MPU is available as the connection between NJU3719 and MPU using only 4 lines. The serial data synchronizing with 5MHz or more clock can be i

文件：204.92 Kbytes 页数：6 Pages

NJRC

日本无线

24位串并转换器

NJU3719A是把串行数据转换为并行数据的24位串并转换器，特别适用于2.4～5.5V工作的MPU输出端口扩展器。由于NJU3719A和MPU之间的连接可用4条线路，所以可有效的利用MPU的输出端口。从DATA端子输入的串行数据可达到5MHz，输入的数据通过串行输入-并行输出的移位寄存器、并行数据锁闩电路和输出驱动器而输出。输入电路是施密特（Schmitt）电路，增强了抗噪声干扰。输出电路是高驱动力输出缓冲器（25mA），可直接驱动LED或其他应用。 • 24位串行输入并行输出\n• 磁滞输入 (5V时一般为0.5V)\n• 工作电压 (2.4到5.5V)\n• 最大工作频率 (5MHz)\n• 输出电流 (5V时为25mA，3V时为5mA)\n• C-MOS技术\n• 封装 (SSOP32);

Nisshinbo

日清纺微电子

24-BIT SERIAL TO PARALLEL CONVERTER

Nisshinbo

日清纺微电子