NCV7518数据手册集成电路（IC）的电机驱动器控制器规格书PDF

描述 Description

The NCV7518 / NCV7518A programmable six channel low-side MOSFET pre-driver is one of a family of FLEXMOS automotive grade products for driving logic-level MOSFETs. The product is controllable by a combination of serial SPI and parallel inputs. The device offers 3.3 V/5 V compatible inputs and the serial output driver can be powered
from either 3.3 V or 5 V. An internal power-on reset provides controlled power up. A reset input allows external re-initialization and an enable input allows all outputs and diagnostics to be simultaneously disabled.
Each channel independently monitors its external MOSFET’s drain voltage for fault conditions. Shorted load fault detection thresholds are fully programmable using an externally programmed reference voltage and a combination of discrete internal ratio values. The ratio values are SPI selectable and allow different detection thresholds for
each channel.
Fault recovery operation for each channel is programmable and may be selected for latch-off or automatic retry. Status information for each channel is 3-bit encoded by fault type and is available through SPI communication.
The FLEXMOS family of products offers application scalability through choice of external MOSFETs.

特性 Features

• 16-bit SPI with Parity and Frame Error Detection
• 3.3 V/5 V Compatible Parallel and Serial Control Inputs
• 3.3 V/5 V Compatible Serial Output Driver
• Reset and Enable Inputs
• Open-drain Fault Flag
• Priority Encoded Diagnostics with Latched Unique Fault Type Data- Shorted Load, Short to GND- Open Load with Fast Charge Option- On and Off State Pulsed Mode Diagnostics
• Ratiometric Diagnostic References and Currents
• Programmable- Shorted Load Fault Detection Thresholds- Fault Recovery Mode- Blanking Timers
• Wettable Flanks Pb-Free Packaging
• NCV Prefix for Automotive and Other Applications RequiringUnique Site and Control Change Requirements; AEC-Q100 Qualifiedand PPAP Capable
• This is a Pb-Free Device
• Scalable to Load by Choice of External MOSFET

应用 Application

• Automotive Power Management
• Power Train
• Engine Control Unit

简介

NCV7518属于集成电路（IC）的电机驱动器控制器。由制造生产的NCV7518电机驱动器，控制器产品属于电机驱动器和控制器电源管理集成电路 (PMIC) 系列，可用于控制或操作从某电源施加到电机或相关机电执行器的电源。所实现的具体功能和特性集根据预期负载和预期应用的特性有很大差异，范围从用于有刷电机的简单开环速度控制到基于步进电机的高级闭环运动控制。