NCV7462数据手册集成电路（IC）的专用IC规格书PDF

描述 Description

The NCV7462 is a monolotic LIN/CAN System-Basis-Chip with enhanced feature set usefull in Automotive Body Control systems. Besides the bus interfaces the IC features two 5V voltage regulators, high-side and low-side switches to control LED's and relays, and supervision functionality like a window watchdog. This allows a highly integrated solution by replacing external discrete components while maintaining the system flexibility. As a consequence, the board space and ECU weight can be minimized.

特性 Features

• Main Supply Functional Operating Range from 5V to 28V
• Main Supply Parametrical Operating Range 6V to 18V
• CAN High Speed Transceiver Compliant to ISO11898
• TxD Time-out on CAN
• LIN Physical Layer According to LIN 2.1 and SAEJ2602
• Programmable TxD Time-out on LIN
• Power Management Through Operating Modes: Normal, Standby, Sleep and Flash
• Low Drop Voltage Regulator VR1: 5V/250mA, ±2% Output Tolerance
• Reverse Current Protected Low Drop Voltage Regulator VR2: 5V/50mA, ±2% Output Tolerance
• 3x Wake-up Inputs, e.g. For Contact Monitoring
• Wake-up Logic with Cyclic Contact Monitoring
• Wake-up Source Recognition
• Independent PWM Functionality for All Outputs (integrated PWM registers)
• Window Watchdog with Programmable Times
• 2x Low-Side Driver (typ. 3Ω) with Over-load Protection and Active Clamp; e.g. for Relays
• 1x High-Side Driver (typ. 1Ω) with Over- and Under-load Detection and Auto-Recovery; e.g. for Bulbs, LEDs and Switches
• 1x High-Side Driver (Selectable Between Typ. 2Ω and 7Ω) with Over- and Under-load Detection; e.g. for LEDs and Switches
• 3x High-Side Driver (typ. 7Ω) with Over- and Under-load Detection; e.g. for LEDs and Switches
• 2x Operational Amplifier for Current Sensing
• 24-Bit SPI Interface
• Protection Against Short Circuit, Over-voltage and Over-temperature

应用 Application

• De-centralized Door Electronic Systems
• Body Control Units (BCUs)
• Climate Control Systems

简介

NCV7462属于集成电路（IC）的专用IC。由制造生产的NCV7462专用 IC专用专用集成电路 (IC) 或芯片设计用于执行特定功能。这个类别包括可寻址开关、空芯仪表驱动器、音视频开关、验证芯片、自动放电、时钟发生器、彩色扫描仪，以及各种应用所用的其他许多集成电路。