NCV7381C中文资料FlexRay® Transceiver, Clamp 30数据手册ONSEMI规格书

描述 Description

NCV7381C is a high−temperature single-channel FlexRay transceiver compliant with the FlexRay Electrical Physical Layer Specification Rev. 3.0.1, capable of communicating at speeds of up to 10 Mbit/s. It provides differential transmit and receive capability between a wired FlexRay communication medium on one side and a protocol controller and a host on the other side. NCV7381C mode control functionality is optimized for nodes permanently connected to car battery. It offers excellent EMC and ESD performance.

特性 Features

• Compliant with FlexRay Electrical Physical Layer SpecificationRev 3.0.1
• FlexRay Transmitter and Receiver in Normal-power Modes forCommunication up to 10 Mbit/s
• Support of 60 ns Bit Time
• FlexRay Low-power Mode Receiver for Remote Wakeup Detection
• Excellent Electromagnetic Susceptibility (EMS) Level over FullFrequency Range. Very Low Electromagnetic Emissions (EME)
• Bus Pins Protected against >10 kV System ESD Pulses
• Safe Behavior under Missing Supply or No Supply Conditions
• Interface Pins for a Protocol Controller and a Host(TxD, RxD, TxEN, RxEN, STBN, BGE, EN, ERRN)
• INH Output for Control of External Regulators
• Local Wakeup Pin WAKE
• TxEN Time-out
• BGE Feedback
• Supply Pins VBAT, VCC, VIO with Independent Voltage Ramp Up:- VBAT Supply Parametrical Range from 5.5 V to 50 V- VCC Supply Parametrical Range from 4.75 V to 5.25 V- VIO Supply Parametrical Range from 2.3 V to 5.25 V
• Compatible with 14 V and 28 V Systems
• Operating Ambient Temperature -40°C to +150°C (TAMB_Class0)
• Junction Temperature Monitoring with Two Levels
• Increased Operating Junction Temperature
• FlexRay Functional Classes- Bus Driver Voltage Regulator Control- Bus Driver Bus Guardian Interface- Bus Driver Logic Level Adaptation- Bus Driver Remote Wakeup
• Automotive Qualification According to AECQ100

应用 Application

• In Vehicle Networking
• Powertrain
• X-by-Wire
• Safety
• Automobiles

简介

NCV7381C属于集成电路（IC）的驱动器接收器收发器。由制造生产的NCV7381C驱动器，接收器，收发器该系列产品的主要功能是提供必需的硬件资源，以通过延长电缆或印制线进行通信。确切的功能会因所采用的通信协议而异，可能包括诸如瞬态抑制之类的功能，这些功能对于通信用途可能并非绝对必要，但对于可能的使用环境却是明智之选。