NCP1200中文资料PWM 控制器，固定频率，反激，电流模式数据手册ONSEMI规格书

描述 Description

Housed in SO-8 or DIP-8 package, the NCP1200 represents a major leap toward ultra-compact Switch-Mode Power Supplies. Thanks to a novel concept, the circuit allows the implementation of a complete offline battery charger or a standby SMPS with few external components. Furthermore, an integrated output short-circuit protection lets the designer build an extremely low-cost AC/DC wall adapter associated with a simplified feedback scheme.With an internal structure operating at a fixed 40 kHz, 60 kHz or 100 kHz, the controller drives low gate-charge switching devices like an IGBT or a MOSFET thus requiring a very small operating power. Thanks to current-mode control, the NCP1200 drastically simplifies the design of reliable and cheap offline converters with excellent audio- susceptibility and inherent pulse-by-pulse control.When the current setpoint falls below a given value, e.g. the output power demand diminishes, the IC automatically enters the so-called skip cycle mode and provides excellent efficiency at light loads. Because this occurs at low peak current, no acoustic noise takes place.Finally, the IC is self-supplied from the DC rail, eliminating the need of an auxiliary winding. This feature ensures operation in presence of low output voltage or shorts.

特性 Features

No Auxiliary Winding Operation
Internal Output Short-Circuit Protection
Extremely Low No-Load Standby Power
Current-Mode with Skip-Cycle Capability
Internal Leading Edge Blanking
250 mA Peak Current Source/Sink Capability
Internally Fixed Frequency at 40 kHz, 60 kHz and 100 kHz
Direct Optocoupler Connection
Built-in Frequency Jittering for Lower EMI
SPICE Models Available for TRANsient and AC Analysis
Internal Temperature Shutdown
Pb-Free Packages are Available

应用 Application

AC/DC AdaptersOffline Battery ChargersAuxiliary/Ancillary Power Supplies (USB, Appliances, TVs, etc.)

简介

NCP1200属于集成电路（IC）的ACDC转换器离线开关。由制造生产的NCP1200AC DC 转换器，离线开关该系列是元器件级控制产品，用于构建将交流市电转换为直流电（通常电压大幅降低）的设备。集成和未集成系统主要开关元件的器件均包括在内。由于高输入输出电压比，以及此类系统中通常需要隔离，这些器件通常与外部变压器配合使用。尽管通常使用定制变压器来实现此用途，但也有许多专门用于此用途的库存产品，请参见“开关转换器，SMPS 变压器”标题。